08-23-2007, 10:06 AM
|
|
Neophyte
Join Date: Aug 2007
Posts: 2
|
|
CEPC Does not recognize Hard Drive
Hi,
I have installed WinCE 5.0 & Platform Builder on a Windows XP desktop computer, having these characteristics:
- CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
- Chipset - Intel 945G
- RAM: 512 MB
- Hard Disk: 20 GB
- Desktop Model : DELL Optiplex GX620
My CEPC has the following configuration:
Processor : AMD Inc., i486
Mother Board : RS482M4
Chip set : ATI � SB450
Hard Drive : 20GB, Western Digital WD200BB-75AUA1
Desktop Model : Wipro Super Genius
These are the steps I made:
- I followed the procedure mentioned in the Platform Help "How to Configure Hard Disk Drives on a CEPC" and added FAT file system / storage device/wordpad to the OS design and built the OS image nk.bin.
- I booted another desktop(CEPC) from the floppy which has the boot sequence
- I attached the Windows XP desktop computer to the CEPC through Ethernet & loaded the nk.bin to CEPC
Wince runs correctly on CEPC but I have some problems:
1) The hard disk drive is not recognized, even if in the OS design I have inserted all the needful drivers and applications, as explained in the Platform Help (section "How to Configure Hard Disk Drives on a CEPC").
2) The computer BIOS recognises hard drive.
3) Do the ATAPI IDE drivers of ATI � SB450 support WINCE?
Can someone please give me some advice or some useful link?
Thanks in advance.
--------------------------------------------------------------------------------
Bhavani
|
| |
|
|
|
|
|
|
Threaded Mode