01-22-2003, 08:00 PM
|
|
Contributing Editor Emeritus
Join Date: Aug 2006
Posts: 8,228
|
|
Arkon Powered PDA Mount For The Dell Axim
http://www.arkon.com/pdapower.html
Arkon's powered PDA mount is now available for the Dell Axim. They already support the iPAQ 3800/3900/5400 and T-Mobile Pocket PC Phone/XDA.
"The Powered PDA cradle is set at 5V. The built-in amplified speaker on the back of the cradle will significantly help you clearly hear your MP3 music, digital books, and GPS voice commands above the noise of the road. This revolutionary cradle also includes a volume control knob, power LED, and a USB interface for popular models of GSM phones." They cost $69.95
|
| |
|
|
|
01-22-2003, 08:34 PM
|
|
Thinker
Join Date: Jul 2003
Posts: 399
|
|
don't miss the disclaimer at the bottom of the page about the XDA model.
"Speaker Feature incompatible with T-Mobile headphone jack"
|
| |
|
|
|
01-23-2003, 12:59 AM
|
|
Ponderer
Join Date: Jun 2002
Posts: 92
|
|
Wow! This is a huge improvement over the universal vent-mount model holder I have. Maybe worth a try ...
[updated] well, seems like it does not have vent mount support and requires a 3M adhesive. Anything with adhesive to either the dash or the device is out of my consideration. :(
|
| |
|
|
|
01-23-2003, 01:11 AM
|
|
Thinker
Join Date: Jul 2003
Posts: 399
|
|
Quote:
|
Originally Posted by portus
well, seems like it does not have vent mount support and requires a 3M adhesive. Anything with adhesive to either the dash or the device is out of my consideration. :(
|
I have to second that...how could they take a cool piece of hardware like this then totally "cheese" it out by using tape to hold it on. I live in an area that's usually 105+ degrees everyday during the summer, that tape would be toast in minutes.....
|
| |
|
|
|
01-23-2003, 02:56 AM
|
|
Thinker
Join Date: Sep 2002
Posts: 405
|
|
Is it just me, or is 65 dollars not justified for this product? It seems a bit too expensive.
WOW! 105 degrees!? I wish I had that, rather than the 8 degree weather here in New Jersey/New York. I better start :drinking: before I put out the recycling tonight!
|
| |
|
|
|
01-23-2003, 04:44 PM
|
|
Thinker
Join Date: Jul 2003
Posts: 399
|
|
Quote:
|
Originally Posted by Fzara
Is it just me, or is 65 dollars not justified for this product? It seems a bit too expensive.
WOW! 105 degrees!? I wish I had that, rather than the 8 degree weather here in New Jersey/New York. I better start :drinking: before I put out the recycling tonight!
|
I second this...$65 for a stick-on holder does seem to be pricy, and the speakerphone function doesn't even work for the PPCPE model.
Today it's only going to be 76 but we expect low 80's by the weekend.... 
|
| |
|
|
|
03-08-2003, 03:42 AM
|
|
Pupil
Join Date: Mar 2002
Posts: 10
|
|
Arkon mount is now T-mobile / XDA / Siemens PPCPE compatible
In response to earlier post by smittyofdhs regarding the t-mobile. Arkon now includes a 3.5 mm to 2.5 mm adapter in their solution at no additional charge. See http://www.arkon.com/pdapower.html
smittyofdhs can rest easy since an alternative solution to the multi-angle adhesive mount is now offered. I've tried the new windshield suction disk and it is super strong. It's been on my windshield for about 3 weeks and no sign at all of falling off.
The new adapter allows you to be able to hear the audio through the built-in amplified speaker. The adapter also allows you to plug in a headset if you have one.
Now it's a complete solution.
|
| |
|
|
|
|
|
|
Linear Mode
