Logging on to Cingular from a Laptop with phone modem (Startrek)

[bystander]

I know that the moderator has done this and no doubt others as well. I really need help.

I have my 3125 paired with my Dell Inspiron 6000. I have set the following according to the Cingular.com/support website but I get no connection/log in.

Settings under Advaced Extra initializatioin commands field (modem settings) AT+cgdcnt=1,"IP","isp.cingular"

ON the Laptop I set the Username field to be [email protected] and the Password as CINGULAR1. The dial field is set to *99#.

I set up a session and it initially connects as the StarTrek antenna symbol is replaced with the square E symbol for a few seconds and then the antenna symbol comes back. I then get an error communication on the laptop a few seconds later. It tells me that we failed to connect.

I NEVER get the "opening port, verifying username and pasword, or registering your computer on the network messages that are referred to in the Kris Kumar article on this website.

I have the Toshiba bluetooth stack on my Dell. I do not see any bluetooth modem selections in the phone and Modem options under control panel. There is only the Conexant D110 MDC V.9x Modem (Com3) and the Standard 33600 bps Modem (Com40) listed in the folder. The Com40 modem is the last one added by the Toshiba stack.

I am sorry to be of such trouble but I work for a small not-for-profit and I want to be able to share info from our website when I visit groups attempting to gather much needed funding. I really need to be able to use the phone as a bluetooth modem.

Thanks to ALL who offer assistance. I hope that someone has made this work between a Dell Inspiron laptop and the Cingular 3125 phone.

Your student.....

:?: :?: :?: :?:

[Kris Kumar]

Settings under Advaced Extra initializatioin commands field (modem settings) AT+cgdcnt=1,"IP","isp.cingular"

ON the Laptop I set the Username field to be [email protected] and the Password as CINGULAR1. The dial field is set to *99#.

I haven't used the 3125 as a modem, but when I used to use my 2125. I was using AT+cgdcnt=1,"IP","wap.cingular"

And username and password as [email protected] and CINGULAR1.

Everything else looks okay to me.

[bystander]

Thanks VERY MUCH for your reply. I will give those changes a try tomorrow.

:)

[stevew]

Here is what I use for my Blackjack with the PDA Connect plan.

Setting up the handset

1. On the handset, press Start.
2. Scroll to Settings and press OK.
3. Scroll to More... and press OK.
4. Scroll to Connections and press OK.
5. Scroll to More... and press OK.
6. Scroll to USB and press OK.
7. Scroll right to Modem and press Done.



Setting up the modem

1. On the PC, connect the Samsung USB Cable from the side of the handset to the USB port on the PC.
2. Windows will detect and install a SAMSUNG CDMA Modem.
3. Click on Start, Settings, Control Panel and double click on Phone and Modem Options.
4. Click on the Modems tab.
5. Click to select the SAMSUNG CDMA Modem and click on Properties.
6. Click on the Advanced tab.
7. In the Extra initialization commands field, type at+cgdcont=1,"IP","isp.cingular"
8. Click on OK twice.



Setting up the connection

1. On the PC, return to the Control Panel.
2. Double click on Network Connections.
3. Click on the link to Create a New Connection.
4. A Network Connection Wizard will appear, click on Next.
5. Tick to select Connect to the Internet.
6. Click on Next.
7. Tick to select Set up my connection manually.
8. Click on Next.
9. Tick to select Connect using a dial-up modem.
10. Click on Next.
11. Check the box to select only the SAMSUNG CDMA Modem.
12. Click on Next.
13. For the ISP Name, type CNG GPRS.
14. Click on Next.
15. Type *99# for the Phone number.
16. Click on Next.
17. Enter [email protected] in the User name field.
18. Enter CINGULAR1 in the Password and Confirm password fields.
19. Check to select from the available options below and click on Next.
20. Click on Finish to complete the setup.



Making the connection

1. On the PC, return to the Network Connections folder.
2. Double click on the CNG GPRS icon.
3. Click on Dial.

You will now be connected to the Cingular GPRS Service