View Full Version : Reformat HP Ipaq Rx3115?
ttvl4447
05-17-2007, 02:08 AM
I've got let over icons from uninstalled applications and could not get rid of them. I'd like to re-format the ipaq but not sore how. any suggestions?
Thank you in advance
LegacyHH
05-17-2007, 02:33 AM
I know if you let the battery run all the way down on my IPAq that will reset it to factory. I would check your manual though, there is a better way to do it I'm sure.
Good luck,
Cybrid
05-17-2007, 04:57 AM
I've got let over icons from uninstalled applications and could not get rid of them. I'd like to re-format the ipaq but not sore how. any suggestions?
Thank you in advanceIt's called a hard reset. refer to your manual or google for your specific devices instructions.
ttvl4447
05-17-2007, 05:19 AM
Thank you for your replies. I will try to look up information on how to hard reset.
applejosh
05-18-2007, 03:39 AM
If it's anything like the rx3715, it involves some sort of Vulcan mind meld hand contortion using the outside two buttons on the front and the recessed reset button (with a stylus) and holding for a few seconds, etc. (I don't have that device any more, and it was over a year since I did the hard reset, so that may not be entirely accurate.)
ttvl4447
05-18-2007, 04:00 AM
Yes, that is exactly it. Press and hold button 1 & 4 and the recess reset button with the stylus at the same time. I managed to get it done.
Thanks all.
vBulletin® v3.8.9, Copyright ©2000-2019, vBulletin Solutions, Inc.