Don Tolson
12-15-2005, 05:00 PM
<img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-GBMHKIT.gif" /><br /><br /><b>Product Category:</b> Audio Accessories<br /><b>Manufacturer:</b> <a href="http://www.iogear.com">IOGear</a><br /><b>Where to Buy:</b> <a href="http://www.amazon.com/gp/product/B000BGZ0BM/qid=1133705794/sr=8-1/ref=sr_8_xs_ap_i1_xgl23/103-0928002-1110250?n=507846&s=electronics&v=glance">Headphone Kit (GBMHKIT);</a> <a href="http://www.amazon.com/gp/product/B000BH0X5Y/sr=1-16/qid=1133710442/ref=sr_1_16/103-0928002-1110250?%5Fencoding=UTF8">Headphones alone (GBMH201);</a> <a href="http://www.amazon.com/gp/product/B000BH0X5O/sr=1-10/qid=1133710726/ref=sr_1_10/103-0928002-1110250?%5Fencoding=UTF8">Audio Transmitter alone (GMA201)</a><br /><b>Price:</b> Headphone Kit - $159.99 USD; Headphones alone - $91.99 USD; Audio Transmitter alone - $91.99 USD<br /><b>System Requirements:</b> Pocket PC Mobile 2003 SE, if using the headphones standalone; None, really, if using the BT Audio Transmitter.<br /><b>Specifications:</b> Weight: Headphones = 0.20 lbs (90.7g), Transmitter = 0.05 lbs (22.7g) Freq. Range 20Hz – 20KHz @ -3dB. A full set of specifications can be found <a href="http://www.iogear.com/main.php?loc=product&Item=GBMHKIT&sec=Specifications#display"> here.</a> <br /><br /><b>Pros:</b><li>Light weight;<br /><li>Excellent sound quality (when paired with the supplied bluetooth audio transmitter);<br /><li>Simple to install (using the transmitter);<br /><li>Able to simultaneously connect to phone and audio source, and provide interruptible call retrieval;<br /><li>Terrific set of accessories provided.<b>Cons:</b><li>Pricy;<br /><li>Range is a bit less than specified;<br /><li>Non-replaceable batteries.<b>Summary:</b> While not the first to produce bluetooth-enabled headphones, IOGear has produced a set which truly lives up to the promise of the ‘virtual cable’ connection. In conjunction with the supplied audio transmitter and using the latest bluetooth audio profiles, this headphone is comfortable, easy to use and produces amazing sound.<br /><br />Read On for the full review!<!><br /><PAGEBREAK><br /><span><b>Introduction</b></span><br />Bluetooth-enabled stereo headphones have long been on my Christmas Wish List, but the cost and the reports I’d read about the resultant sound quality available through bluetooth had put me off. I’ve also dreamed of having a bluetooth earpiece for use on my bike, so I could keep connected to my cell phone while on the way to work and back home. And of course, I wanted it all in one package!!<br /><br />So, when the chance came along to review the new IOGear GBMH201 Bluetooth Stereo Headphone Kit, I jumped at it right away. It was certainly an experience getting everything set up. It wasn’t that difficult using the transmitter and headphones provided in the kit, but I wanted to play with the set a bit to determine its full capabilities. So, there was a bit of exploration into uncharted territory. I’ll explain as we go along.<br /><br /><span><b>Packaging and Contents</b></span><br />The Headphone Kit which I reviewed comes in the now ubiquitous clear plastic, bubble-wrap package sealed around the edge. For a reviewer like me, these are the bane of my existence, since it’s almost impossible to open these things while leaving any portion of it intact for return to the manufacturer.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-package.jpg" /><br /><i>Figure 1: IOGear’s GBMH201 packaging.</i><br /><br />At first glance, it appears as if all you get are the headphones and the bluetooth transmitter, but hidden in the bottom half (under the grey label) is a plethora of accessories and connectors.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-adapter.jpg" /><br /><i>Figure 2: The AC to USB power adapter.</i><br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-cables.jpg" /><br /><i>Figure 3: Supplied power cables. Note the European power adapter and use of the micro-power plugs (yellow tipped) and the splitter provided)</i><br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-audiocables.jpg" /><br /><i>Figure 4: Audio cables supplied with the package.</i><br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-kitbag.jpg" /><br /><i>Figure 5: And you even get a carrying bag with additional earpiece covers.</i><br /><br />So, here’s what you get:<li>Stereo Headphones (aka GBMH201, if you want to order it separately);<br /><li>Bluetooth Audio Transmitter (GBMA201, also available separately);<br /><li>AC to USB power adapter;<br /><li>Detachable microphone on a bendable stalk which plugs into the headphones;<br /><li>Adapter cable – mini-phone (3.5mm) to RCA plug;<br /><li>Adapter cable – mini-phone (3.5mm) to 1/4" stereo phone;<br /><li>Extension cable – mini-phone (3.5mm);<br /><li>Power cable splitter (so you can charge the headphones and the transmitter at the same time);<br /><li>Quick Start Guide and;<br /><li>Cloth carrying bag. Whew, that’s a lot to cram into any package! I was quite pleasantly surprised to find that it wasn't ‘North America-centric’, in that connectors were provided for European standards as well. It appears that IOGear has thought of just about everything.<br /><br /><span><b>Charging Them Up</b></span><br />Both the headphones and the transmitter are powered by non-accessible/non-replaceable (as far as I could see) rechargeable cells, so the first order of business was to charge everything up. IOGear thoughtfully provides a splitter cable from the power adapter which can be used to charge them up simultaneously and the Quick Start Guide suggests you charge them for about two hours prior to first use. Although it looked like they came charged, I decided to not take any chances. When you plug them in, the charging cycle is identified by a red LED on the headphones and the audio transmitter. I found that the red LEDs went out (signifying the batteries were charged) after about an hour, but I decided to keep it charging for the full two hours, just in case.<br /> <PAGEBREAK> <br /><span><b>Pairing the Headphones Only</b></span><br />So, now comes the experimentation part. Normally the headphones are supposed to be used in conjunction with the supplied audio transmitter, but being a bit of a bluetooth first adopter in my work, I decided to try pairing the headphones directly to my Axim X50v using the existing Bluetooth drivers.<br /><br />As Ed, Jason and others having pointed out, it’s not quite as easy and straightforward as the ‘toothers’ would have you believe. First off, don’t fall in to the trap of simply turning all the bluetooth stuff on and trying to discover services available. You’ll end up with messages saying things like “No services are available”. Here’s how I made the connection.<br /><br /><i>Note: All these shots are on Windows Mobile 2003 Second Edition. I didn’t have WM5 running on my Axim at that time, and now I don’t have the headphones to show you how that connection looks. NOTE: THIS PROCEDURE IS NOT NECESSARY FOR OPERATION WITH THE AUDIO TRANSMITTER!</i><br /><br />First, turn on the headphones and place it in Discovery mode by pressing the power button in the centre of the headset for about two to three seconds. A blue LED will begin flashing. Then go into the Bluetooth Manager on the Pocket PC, and select Pairing. You should see a screen like this.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-addingnewdevice.gif" /><br /><i>Figure 6: Adding a new Bluetooth Device (WM2003 SE).</i><br /><br />Tapping on the search icon to the right of the Device box, your Pocket PC should go out and try to find who’s out there. It should discover the IOGEAR Headphones and return with a screen that looks like:<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-pairing.gif" /><br /><i>Figure 7: The Headphones have been discovered!.</i><br /><br />Now, as per IOGEAR’s suggestion, input a passkey of ‘0000’ and tap OK. That will establish the headphones as a ‘paired device’ with your Pocket PC. OK, so now we can connect up the services. Back at the Bluetooth Manager on the Pocket PC, start up the Connection Wizard and select the Handsfree/Headset Setup option.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05handsfreeoption.gif" /><br /><i>Figure 8: Selecting the Handsfree / Headset option.</i><br /><br />From there, it should automagically identify the IOGear Headphones as the appropriate device and you are off to the races!<br /><br />I have to admit I was singularly unimpressed by the quality of audio available using the bluetooth drivers provided with the Dell Axim. There was considerable hiss, the overall sound was very muddy with lots of pops and crackles. It sounded like most of the upper frequencies (above 8 to 10 KHz) were missing and it certainly was hard listening to music for any appreciable length of time. I was able to walk away about 35 feet (10m) from the Axim before I lost the signal.<br /><br />I was also able to successfully connect with my Nokia 3650 cell phone using a similar process (pair first, then connect). The audio quality was similar to that of the Axim X50v – not quite as much hiss, but muffled and missing a lot of the higher end frequencies. The neat part of pairing with a cell phone was that when a call comes in, the headphones generate a call ring (similar to that found on regular North American landlines – single long ring – and you answer the call by tapping the power button on the headset. The supplied microphone plugs into a jack located at the bottom of the right earpiece (sorry about that, left-handers).<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-headphone+mike.jpg" /><br /><i>Figure 9: Headphone with the mike plugged in.</i><br /><br />As reported by others, audio from the microphone was a little muffled, but definitely clear and understandable. They could also clearly recognize my voice and didn’t get a lot of extraneous pickup from other noise sources around me. Unfortunately, using the built-in bluetooth stack in my Dell, I wasn’t able to simultaneously connect the headphones to the Dell and the phone, something that was intimated by the Quick Start Guide as possible to do.<br /> <PAGEBREAK> <br /><span><b>Now, With the Supplied B/T Transmitter...</b></span><br />OK, so now I’ve had my bit of exploratory fun – let’s do this the way things were intended to be connected!<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-transmitter.jpg" /><br /><i>Figure 10: The IOGear Bluetooth Audio Transmitter.</i><br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-transmitter2.jpg" /><br /><i>Figure 11: A shot of the Transmitter’s Pair/Connect button and LED.</i><br /><br />Pairing with IOGear’s supplied bluetooth audio transmitter is much simpler. Press the power button on the headset for a couple of seconds, until the blue LED starts flashing, then press the Connect/Pair button on the transmitter for a second or two and wait for both blue LEDs to go solid, indicating that pairing has completed. Then, you plug the transmitter’s audio plug into an available jack, and voila – sound emits from the headphones. And I have to say <b>WOW! WHAT A DIFFERENCE IN QUALITY!</b><br /><br />The hiss is completely gone, replaced with beautiful, full-fidelity stereo (to use an antiquated, but accurate term). The sound quality is easily equal to that of a corded headset (and in many cases, much better than some of the less expensive headset/earbud combinations). My guess is that this is the difference between using the basic audio headset profile vs. the Advanced Audio Distribution Profile (A2DP). Now the headsets are running at the frequency response shown in the specifications. Generally, the sound is quite listenable and frequency response is fairly flat through the audible range. My ears are getting a bit old, so I miss stuff above about 15Khz, but few if any musicians produce sounds above this threshold anyway.<br /><br />One of the great advantages of using the Bluetooth Audio Transmitter (aside from much better sound quality), is that it instantly provides Bluetooth capability to anything with an audio output jack. This would include radios, MP3 players, TV sets, etc.<br /><br />Range was pretty much the same as with the direct pairing – about 35 feet (10m). It’s not quite the 20m in the specifications, but the building I was testing in is notorious for killing radio frequencies in any band (FM Radio is almost impossible in here).<br /><br />And.. the extra bonus...I was able to pair the headphones with my Dell and my phone at the same time! Pretty cool being able to listen to music, then interrupt it to answer a phone call when it comes in.<br /><br />On the headphones, there are also forward/back buttons on the right side of the headset for using the Advanced Video Remote Control Profile (AVRCP) to control your music/video device.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-headphones.jpg" /><br /><i>Figure 12: Back of the Headphones, showing the selection buttons around the edge.</i><br /><br />Unfortunately, I’m one of those luddites who uses his Pocket PC to play music, so I don’t have an iPOD to test out these capabilities.<br /> <PAGEBREAK> <br /><span><b>Comfort</b></span><br />According to the specifications, the headphones weigh about 0.20 lbs (about 3.2 oz or 90.7 grams) which to my head, feels quite light. A good deal lighter than the Radio Shack and AudioVox full-ear enclosure headphones from the '70s that I used to wear. Instead of an over-the-head support, they utilize the more currently common hook-over-the-ear, behind the head concept.<br /><br /><img src="http://www.pocketpcthoughts.com/images/web/2003/don-iogear-oct05-model2.jpg" /><br /><i>Figure 13: Wearing the IOGear Bluetooth Stereo Headphones. Not too geeky, is it?</i><br /><br />Generally, they feel like you’re wearing a pair of those fluffy winter earmuffs. I tested them for longevity by listening to music all during an 8-hour work day, (yes, it was one of those days where I just have to write, and not particularly deal with anyone – it happens...). At the end of the day, the headphones were still pretty comfortable, and I didn’t feel like there were big gouges in my ears.<br /><br />I also tried wearing the headphones with the microphone attachment on the way home on my bike, paired with my phone. Again, the fit was comfortable, and my bike helmet straps came over top of the earpieces to keep everything in place securely. The nice thing about the design is that it doesn’t completely block out external sounds, while giving full-body to what you want to hear. Thus, I was easily able to hear traffic noise, etc., while I was biking. The pairing worked well on the bike, easily able to connect to the phone in the panniers over the back wheel, and it kept me available and connected all the way home. Because I wear a yellow reflective biking jacket similar to the local constabulary, many people said I looked just like one of the bike patrol with the mic in front of my face.<br /><br /><span><b>Battery Life</b></span><br />As mentioned above, the headphones and audio transmitter come with LithiumIon rechargeable batteries built-in. I didn’t see any way to access them without taking the headphones apart. A charger is provided which takes approximately 2 hours to fully charge them – either separately or simultaneously. I wasn’t able to get accurate readings on the charge levels, but I ran the headphones and audio transmitter playing music throughout an 8-hour day with no problems, and there still appeared to be charge in the batteries at the end of the day. The specifications provided by IOGear say the batteries are 550 mAh and the power consumption is 42mA for a straight link, 83mA for music playback and 49mA for talking through the headset. Thus, if you work the math, you should be able to get at least 6-7 hours of music playback (I did better!) and 11 hours of talk time when connected to a phone.<br /><br /><span><b>Conclusions</b></span><br />This is definitely a package I could grow to love and use each day. I felt sad when I had to send the sample back to IOGear, since the headphones met so many of my requirements. Oh well, at least I have something <i>specific</i> to put on my Christmas Wish List this year.<br /><br /><i>Actually, the picture doesn't look as geeky as I thought it would. As a consultant working for Fujitsu, Don loves having the only bluetooth-enabled cubicle in the building.</i>