View Full Version : What ipaqs DO NOT have Nevo remote control?
Hello,
I'm studying rx3115 Media Companion and I see that it has a remote control. Is it Nevo? If yes, what new models do not have Nevo remote control embedded?
Thx,
rim
Hi-o
I have a 2215, and while it used to have Nevo on it, stored in the Rom-based backup area, since I hard-reset it, the program is not working anymore. I expect it is due to the registry entries and such that were lost in the reset but I thought you might want to be aware that after the reset the app doesn't work again w/o re-install, even though it was installed in the protected area.
AXE
Don't Panic!
07-08-2005, 07:46 PM
The latest "flagship" model the HP iPaq hx4700 doesn't have NEVO.
Darius Wey
07-09-2005, 04:10 AM
Among the new models, you'd only be looking at the rx3000 Mobile Media Companion series for the Nevo package. While it is a nice solution, HP has not offered Windows Mobile 5.0 support for the series, so its future lifespan may be a little thin. If I were you, I'd look at the hx4700, the hx2000 series, or perhaps another manufacturer's device (e.g. Dell Axim X50v, Fujitsu-Siemens LOOX 720), since you can easily replicate the Nevo experience with other software.
Menneisyys
07-09-2005, 09:59 AM
You may also want to read this thread on available remote controller apps / hardware (http://discussion.brighthand.com/showthread.php?s=&threadid=115572). With hardware-based solutions, you'll be able to remote control devices even with non-CIR-enabled PDA's (that is, as far as current PDA's are considered, non-rx3xxx's / Pocket Loox 718/720's).
Hi-o
I have a 2215, and while it used to have Nevo on it, stored in the Rom-based backup area, since I hard-reset it, the program is not working anymore. I expect it is due to the registry entries and such that were lost in the reset but I thought you might want to be aware that after the reset the app doesn't work again w/o re-install, even though it was installed in the protected area.
AXE
That's strange. I have a 2210 that has been hard reset maybe 10 times, and Nevo's still working. Of course I had to set it up again for my TV and DVD player.
stevelam
07-18-2005, 04:14 PM
That's strange. I have a 2210 that has been hard reset maybe 10 times, and Nevo's still working. Of course I had to set it up again for my TV and DVD player.
I didnt even have to set it all up again. It was all in the filestore.
vBulletin® v3.8.9, Copyright ©2000-2019, vBulletin Solutions, Inc.