Log in

View Full Version : 2750 and TomTom 5 problem


chrissyboy6969
06-07-2005, 06:31 PM
Cannot get my BT338 bluetooth GPS recognised by TomTom 5
I have it paired, connected using com ports 5 and 8 but i have tried every setting with TomTom and it will not recognise it, i cant specifiy what ports to use in TomTom just other bluetooth receiver and it just says no gps found. Do i need a driver update anyone any idea

Cheers
Chris

BATTY_1
06-07-2005, 11:10 PM
Chris

I had a very similar issue today with my 2750.

To solve I removed all blutooth settings from my PPC, started up the tom tom wizard, went through all the yes's then into bluetooth connection wizard, selected the explore a bluetooth device, found the device then selected the device and connected. By magic all was solved.

In navigator, I had the serial port set to 5.

Hopefully this was some help.

chrissyboy6969
06-08-2005, 09:12 AM
Tried that and its the smae no gps device found

Cheers
Chris

SHC
06-13-2005, 11:02 PM
I've got the ame problem on my 4700, been round and round in circles. tried fixes mentioned on pocketgpsworld all to no avail.

chrissyboy6969
06-14-2005, 10:59 AM
Got mine working but not 100% sure how, downloaded leadtech winfast navigator, used comm port 8 and nmea in the setup, asked it to factory reset my gps receiver and bam all sats found, loaded tomtom and selected other bluetooth, baud rate 38400, comm 8 and away it went, had no problems since

Good luck let me know how you get on

SHC
06-14-2005, 11:40 AM
How did you get COM port 8 to show up in the TomTom GPS settings screen?