beemer
05-24-2005, 08:03 AM
I 've just released 0.47 version of TodayWarrior.
Now it supports bright slider in all HTC based machines, like Dell Axim50, HP HX2750, etc as long as all what were supported yet.
Also has support for changing the battery.
POWER MANAGEMENT
-Access to the Power panel of control panel
Current power percentage of the battery
Current elapsed time from the last full charge of the battery. It can also show that we are charging or operating with external power.
Tapping this field we can select to reset Elapsed time. Useful on battery change. NEW
Remaining Time with at the current consumption rate: An estimate of how long the PocketPC will last at the current discharge rate. It can indicate also, the remaining time to reach 100 % of charge or that the battery is fully charged.
Tapping cyclically Remaining time field the display change to Battery Volts, current (mA), power consumption (mW) and battery temperature in ºC and ºF. These data are only available in some PPCs :
Power off button.
Reset Button: Will display a message for confirmation.
Icon Always ON: Touching this icon changes it to green color. In this state the PPC will not turn off although we have it set in the energy options. Useful when scanning networks or downloading files. It is deactivated manually or automatically on having charged the battery or if the remaining battery level is lower than 25 %.
Icon Memory: It starts memory control panel.
Icon Today: It starts today element control panel.
Backlight slider: it allows us to change the screen brightness when we are using the PPC with batteries. Turning off of the backlight is prevented. The maximum value is user-selectable from options panel
WIFI MANAGEMENT :
-Icon of WIFI Card ON/OFF: Grayed without card or not recognized by TodayWarrior, in red OFF and in green ON . For NDIS cards the icon is blue. Optionally can be deactivated for PocketPCs with their own mechanism to do so. If deactivated on Dell X50, the icon calls the internal On/Off utility.
-Shows current connection speed of WIFI card when connected. While disconnected, but card on, it shows negotiation speed of the card. The type of letter is Bold and there are no selection arrows. Works with PRISM and NDIS cards
-Connection speed selector: it can be selected between 1Mb/s, 2Mb/s, Car 1-2Mb/s, 5.5Mb/s, 11Mb/s, Full AutoMb/s. To enter in, tap on the current speed of the card. To go out tap again. The type of letter changes to normal and the selecting arrows appears. If we change the speed, on having gone out, the new speed will be applied and the radio will go off momentarily, which can cause a few seconds of disconnection of the LAN. Only for PRISM
-Icon of Activate/ deactivate the Network Scanner. When green it scans every two seconds. When red, it store the latest scanned networks.
-Information about available networks: Shows SSID, Rx level with a color bar and digits, radio channel used and if WEP security is enabled (W) or is Open (O). If several networks were received, two arrows appear in order to change the network displayed (rotational). Normally the most powerful network is selected.
-TodayWarrior plays a sound when a new network is found an maintains the lost networks for 30 seconds after they disappear.
-AvantGo sync panel access icon.
-Access Icon to WZC to connect to the available networks.
Can be found (freeware, of course) here:
http://personales.ya.com/webpages/TodayWarrior/English.htm
beemer
Now it supports bright slider in all HTC based machines, like Dell Axim50, HP HX2750, etc as long as all what were supported yet.
Also has support for changing the battery.
POWER MANAGEMENT
-Access to the Power panel of control panel
Current power percentage of the battery
Current elapsed time from the last full charge of the battery. It can also show that we are charging or operating with external power.
Tapping this field we can select to reset Elapsed time. Useful on battery change. NEW
Remaining Time with at the current consumption rate: An estimate of how long the PocketPC will last at the current discharge rate. It can indicate also, the remaining time to reach 100 % of charge or that the battery is fully charged.
Tapping cyclically Remaining time field the display change to Battery Volts, current (mA), power consumption (mW) and battery temperature in ºC and ºF. These data are only available in some PPCs :
Power off button.
Reset Button: Will display a message for confirmation.
Icon Always ON: Touching this icon changes it to green color. In this state the PPC will not turn off although we have it set in the energy options. Useful when scanning networks or downloading files. It is deactivated manually or automatically on having charged the battery or if the remaining battery level is lower than 25 %.
Icon Memory: It starts memory control panel.
Icon Today: It starts today element control panel.
Backlight slider: it allows us to change the screen brightness when we are using the PPC with batteries. Turning off of the backlight is prevented. The maximum value is user-selectable from options panel
WIFI MANAGEMENT :
-Icon of WIFI Card ON/OFF: Grayed without card or not recognized by TodayWarrior, in red OFF and in green ON . For NDIS cards the icon is blue. Optionally can be deactivated for PocketPCs with their own mechanism to do so. If deactivated on Dell X50, the icon calls the internal On/Off utility.
-Shows current connection speed of WIFI card when connected. While disconnected, but card on, it shows negotiation speed of the card. The type of letter is Bold and there are no selection arrows. Works with PRISM and NDIS cards
-Connection speed selector: it can be selected between 1Mb/s, 2Mb/s, Car 1-2Mb/s, 5.5Mb/s, 11Mb/s, Full AutoMb/s. To enter in, tap on the current speed of the card. To go out tap again. The type of letter changes to normal and the selecting arrows appears. If we change the speed, on having gone out, the new speed will be applied and the radio will go off momentarily, which can cause a few seconds of disconnection of the LAN. Only for PRISM
-Icon of Activate/ deactivate the Network Scanner. When green it scans every two seconds. When red, it store the latest scanned networks.
-Information about available networks: Shows SSID, Rx level with a color bar and digits, radio channel used and if WEP security is enabled (W) or is Open (O). If several networks were received, two arrows appear in order to change the network displayed (rotational). Normally the most powerful network is selected.
-TodayWarrior plays a sound when a new network is found an maintains the lost networks for 30 seconds after they disappear.
-AvantGo sync panel access icon.
-Access Icon to WZC to connect to the available networks.
Can be found (freeware, of course) here:
http://personales.ya.com/webpages/TodayWarrior/English.htm
beemer