Help with Back up battery!

[Xtreme23]

Hey I replaced my backup battery and been trying forever to slide the back cover on...any one have any advice? It should be simple but i've been having a tough time and didn't want to break anything.

Thanks!

[Oreocat]

I had trouble with this too at first!

Lay the cover on top of the battery, about a 1/4 out from the black locking clip. *Press* down on it gently, and making sure it's level, slide it straight towards the lock somewhat slowly. As it meets the clip, it should gently force the lock down below the cover on its own, with the cover then sliding over it to lock in place. The white tabs underneath should go under the clip and stabilize the cover as it locks.

I hope this helps. Good luck :)

[Xtreme23]

still no luck .. i keep trying and trying .. :roll:

[swalthes]

I have seen many of the back-up battery covers where the prongs will bend/crack so they will not align properly. I woiuld double check to make sure they are straight.