Log in

View Full Version : 5455 does not turn off Device


dhoward
01-09-2003, 07:25 AM
Settings. On my new iPAQ 5455, the power settings to turn device OFF after xx minutes, is NOT working, either in the Battery or External Power mode.

Have tested it with a stop watch on several different time settings. Same results.

Example: Alarm sounds. After 2 minutes on Battery Power, Backlight goes off. Unit does not Power-Off after 3 minutes.

To check any problems or conflicts:
On Battery Power: Turn backlight off if the device is not used for xx, is checked.

On Battery Power: Turn off device if not used for xx, is checked.

Stopped All Programs from Memory->Running Programs. No programs running whatsoever.

BackLight on Battery Power Set: 30 seconds
Device on Battery Power Set: 1 minute

Backlight Powers off at 30 seconds
Device Power does NOT turn off unit at 1 minute, or ever.

Same results on External Power.

Results: Have to manually power down the unit after every use or alarm. If an alarm goes off without user's knowledge, the 5455 stays on permanently, w/o backlight, forever--running the battery down.

Look up a Contact. Backlight goes out, as normal. Device never turns off. Continuously on.

Check your unit. Are you having a similar problem with your new unit?

Txs.

seanturner
01-09-2003, 07:45 AM
Wierd... works just fine on mine... Try a hard reset... I had a wierd issue with not being able to sync wirelessly until I did a hard reset?

Steven Cedrone
01-09-2003, 04:18 PM
Before you do a hard reset, try a soft reset. And remember: a hard reset will result in a factory "fresh" device. You data will be gone...

Steve