cases for the Dell Axim?

[etalianstallion]

Hi, I am new to the world of Pocket PC's and have just recently ordered and received my Dell Axim. To say the least I am very happy with the device so far (I used to own a Sony Clie PEG-S300). BIG difference. 8O

Anyway, the free case provided with the Dell Axim really doesn't work for me--it's quite bulky and almost doubles the size of the device. :?

Has anyone found some 3rd-party cases that fit and work well with the Axim? Thanks!

[bluevolume]

I picked up a Data Suit case, branded by BodyGlove. They have them at Best Buy, somewhere around $15. I had to cut out the credit card holder inside, but once I did that it fits perfectly. It has a hardened top which is great for protecting the screen.

This is all that will fit though -- won't be able to cart around anything else inside it.

Blue

[bluevolume]

Here is the link if you're interrested (looks like I got mine on sale):

http://www.bestbuy.com/detail.asp?e=11099202&m=488&cat=564&scat=565

[AUTommyJ]

I picked up the same case for my Axim at the local Target this weekend for $13.99, it fits great, although I not very keen on sticking two giant pieces of velcro to the back of my Axim - so I just let it rest freely (it doesn't move at all) and I am just a little more careful when opening the case. Cheap fix for the time being until something better comes along...

[etalianstallion]

Thanks for the input on the BodyGlove case. Personally I like the leather flip-cases like the ones for the Palm Vx or those hard cases, but anything at this point is better than the one that shipped with the Axim.

I'll go into the stores to check out the BodyGlove case.

And you're right...I'm not a big fan of the velcro-on-back-of PDA option, but that may just have to do for now.

Thanks!

[robert_biggs]

I use a Belkin Leather Flip Case for Toshiba e740/e310 (http://www.bestbuy.com/Detail.asp?m=488&cat=564&scat=565&e=11124663) that I bought at Best Buy. Here's a better picture (http://www.ht.com.au/Scripts/xworks.exe?PART:F5581) of it open. It was a great case for my old e310 and it has an elastic/web material on the sides that allows it to stretch. I ended up cuting a tiny bit of the webbing on the sides and bottom to access the SD slot, AC adapter connector, and allow the Axim to fit better. It'a a snug fit, but not too bad. The strap is barely long enough to snap it closed, but will not reach if you put credit cards or other stuff in the storage pouch. All the buttons, screen, and speaker are visible and usable. The scroll wheel is partially covered even after cutting back the webbing. But it does the job until a better case comes along. :)

[mike6024]

I had one of these for my E125 and it was a really nice case. http://www.tuff-as-nuts.com/Dell-axim-x5-holsters.html
Shipped from Australia too :D

[etalianstallion]

RB, would you mind posting some pictures of your Dell Axim in the Belkin Leather Flipcase for the Toshiba E740? I brought mine to the store to test out some cases but most of them were in sealed boxes.

Also, as an FYI, I contacted www.thepocketsolution.com and asked if they were planning on making an aluminum case for the Axim. Here's the response I received from them today:

--------------------------------------------------

Dear Prospective Cover-Up User,

As we anticipate the Dell Axim 5 to have a significant share of the
PDA market, we are in the process of developing our prototype and
anticipate the product to be available in 4 weeks.

Please sign up for our mailing list below and you will be notified
when we will start taking orders:

http://lb.bcentral.com/ex/manage/subscriberprefs.aspx

In the interim,please check our site periodically to see the other
great Pocket Solutions products we manufacture and distribute.

Season's Greetings.

Sincerely,

Lou Giuffre
Product Manager
Pocket Solutions, Inc.
[email protected]

[robert_biggs]

Sorry, I don't have a digital camera yet and my scanner is under the Christmas Tree. :D The Axim fits well in the Belkin case if you cut the webbing back a little. Looks very similar to having an e740 in it. The lid dosen't close as nicely as it did with my e310, especially after putting in credit cards. The screen, buttons, and speaker are all unobscured with the unit almost all the way down in the case. Pushing the unit down completely to close the lid slightly obscures 2 of the buttons and speaker, but not too bad. Makes a great slim protector to double as a wallet. But I'll get something better if anything similar in design comes out for the Axim for roughly the same price I paid at Best Buy.

[GoldKey]

etalianstallion

When did pocket solutions give you that estimate. Mike DiLeo told me 3-4 weeks from their receipt. The ordered the first day, so they should have had them for 3 weeks now which means they should have them by the end of next week. I have been debating what type of case I want to get and their flip covers seem perfect for my usage pattern.

[etalianstallion]

goldkey,

I emailed them last night and got the reply this morning. It looks like they may have just done a copy-paste of a previous response to another customer inquiry.

Hope that helps.

[etalianstallion]

Just a thought...seeing the Dell Axim review posted on PocketPCPassion.com and the picture of the Dell Axim on top of the HP Jornada gave me an idea. Since the 2 are similar in size, the cases that work for the Jornada may just fit okay, with the exception of where the buttons/memory card slots/jog dials are situated. Here's a case from Belkin that may work. If someone has already tried this please let me know. I'm going to go to stores and see if I can try it on the Axim.

http://images.belkin.com/F8H2400/FUL1_F8H2400.jpg

http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=200589&pcount=&Product_Id=126051&Section.Section_Path=%2F%2FRoot%2FMobileSolutions%2FPDAAccessories%2FCases%2F

[othell]

two possibles:

http://www.infusionthreads.com/ (the slip sport is best probably)

http://www.iproductsonline.net/catalog/iholsters_for_the_dell_axim_1770779.htm

[Pugnax]

I just received this email. Looks like EB Cases has created a slipper for the Axim! 8)

Dear Customers,

Thank you for your interest in our products and for your continued
support. You expressed an interest in being notified when we had
designed Slipper cases for the Dell Axim X5 handhelds. We
apologize that we were unable to release the case(s) more quickly and we
thank you for your patience and understanding.

We greatly appreciated the suggestions we received regarding features
you wanted to see in these cases; we have incorporated many of these
features into the case design. We welcome your continued feedback.

The cases below are new product releases, they are NOT currently in
stock. We expect to be able to begin shipping most versions in
early January. Internet orders will be processed more quickly
than telephone or fax orders.

You may find details about these and other compatible cases and
accessories for the Dell Axim X5 by selecting "Dell Axim" under Category on
our Catalog search page at the following
URL:

http://www.ebcases.com/Catalog.bok


Or you may access the following direct links to these products:


Slipper Axim X5 w/clip - Slim, custom-designed leather flip-top case
(attaches to your belt): http://www.ebcases.com/Detail.bok?&no=218


Slipper Axim X5 - Slim, custom-designed leather flip-top case (does NOT
attach to your belt): http://www.ebcases.com/Detail.bok?&no=217


TravelKit-Axim X5 - USB Hot-synch/charging cable, Car adapter, AC
transformer:
http://www.ebcases.com/Detail.bok?&no=218

[tcugrilla]

i am looking for a leather case for my axim that opens to the side. has anyone seen one of these yet?

[smapdi636]

i am looking for a leather case for my axim that opens to the side. has anyone seen one of these yet?

Hmmm, maybe...

http://www.dell.com/us/en/dhs/learnmore/learnmore_pdacase_notebooks_popup_latit_details.htm

[etalianstallion]

Looks like some cases are starting to appear for the Dell Axim, but none that will ship until January 2003. For those who have found a temporary solution, or for those who do get some of these new cases, I think everyone would appreciate it if you could provide some feedback on the quality/fit of the case, where you bought it, and some pictures (if you have a digicam readily available).

I'm waiting for the anodized aluminum cases from www.thepocketsolution.com. Hopefully they start taking orders soon.

[etalianstallion]

For anyone looking for a travel kit for the Dell Axim...in case you are using a GPS module on your PPC and want to use it in the car. From the same company starting to make flip-cases for the Axim....

http://www.ebcases.com/Detail.bok/d8c8e03cf28544120520?&category=Dell+Axim&start=1&total=7&no=219

[handheldplanet]

We've finally got an Axim case in the works - It should be on our site within the next two weeks!

[etalianstallion]

Any information on what kind of case? Top flip? Side Flip? Hard cover? Any details would be much appreciated!

[Pat Logsdon]

Just found out that Sena Cases will be making a case for the Axim - looks like they're a Clie-only shop right now, but those cases look like they give Vaja a run for their money...

http://www.senacases.com/

(Scroll down a bit to see the blurb about the Axim and Tungsten T)

[klinux]

Got two cases from them before. Top quality. I would say better than Vaja but it would be comparing apples and oranges (Vaja is smoother, thinner and less protective - EL is harder, slightly thicker, but can easily survive a 6 foot drop).

http://www.extreme-limit.co.jp/english/index.html

[blazingwolf]

My wife got a leather case with a side zipper from iconcepts that fits pretty well. It came in the PDA universal starter kit and was only $19.95. It will hold credit cards also. The kit also includes universal screen protectors, that can be cut to size, cleaning wipes, a 2 in 1 stylus and Photobase picture software. Found at CompUSA.

[Kati Compton]

Got two cases from them before. Top quality. I would say better than Vaja but it would be comparing apples and oranges (Vaja is smoother, thinner and less protective - EL is harder, slightly thicker, but can easily survive a 6 foot drop).

http://www.extreme-limit.co.jp/english/index.html

I like their design (especially the metal & leather suit (not the gadget case) for the Zaurus....

I could wish that the stitching was less obvious, though. I know the white thread stitching is a "look", but I'd prefer same-color stitching... It would make it look less "rough".

[Kati Compton]

My perfect case would be leather and/or metal, side opening, no velcro on the PDA, room to store 1-2 CF cards (this is more optional), and space for a notepad and pen/stylus combo.... Really, I want something very small that is "enough" for when I go to meetings/talks/conference presentations.

Hope somebody comes out with one soon. :)

[etalianstallion]

I could wish that the stitching was less obvious, though. I know the white thread stitching is a "look", but I'd prefer same-color stitching... It would make it look less "rough".

Maybe a brown or black sharpie or laundry marker would do the trick. :)

I think I'm going to need 2 cases...1 which basically just wraps the PPC, just to protect it from scratches and such. Of course it'd be nice to also have a multi-function pen/stylus too. For those times when I just want to carry the PPC and nothing more.

The second case would need to hold accessories/multifunction stylus/notepad. Something that is like a DayPlanner without all the paper.

[Kati Compton]

Maybe a black sharpie or laundry marker would do the trick. :)

I think I'm going to need 2 cases...1 which basically just wraps the PPC, just to protect it from scratches and such. Of course it'd be nice to also have a multi-function pen/stylus too. For those times when I just want to carry the PPC and nothing more.

The second case would need to hold accessories/multifunction stylus/notepad. Something that is like a DayPlanner without all the paper.

Good ideas all around. Let me know what you end up getting so I can copy. ;)

[etalianstallion]

The case that came with the Dell Axim is one of my only gripes with the device. Dell seemed to have done such a great job with the unit, learning from mistakes of the PPC makers before, and integrating the functionality/features that users have wanted in a single device. The ultimate device (for me at least) was the Toshiba E740: removable battery, CF and SD, built-in Wifi, and relatively compact form factor. Unfortuately the transflective screen was a top priority for me so the E740 would have never worked out.

Dell came pretty close to meeting all my requirements for a PPC. Would have been nice to have an SDIO slot, the built-in Wifi, maybe slightly thinner form factor, and larger screen (hey, never hurts to dream). I would have liked to see a protective cover like that included wtih the iPAQ and a cradle that is usable with the protective cover on. But hey, I do like the blue Dell sign that lights up when I dock the Axim. :D

Heck, who am I kidding. At that price range with all those features..... 8O

[Oreocat]

I've also been looking for a case for my Axim.

After some research, I checked out Smartercase.com, because their cases come in several different covers (leather, denim, tweed, etc) so they're sort of personalizable (is that a word?) and they're made with steel construction. Website has a photo of someone *standing* on one of the cases.

I've spoken several times with the owner, Tim, and he is making a case for the Axim. He sent me photo of the prototype, which I tried to attach, but it didn't work. Sorry. It will still be a couple of weeks before they're ready, but it seems like it will hold what I need, the Axim and several CF or SD cards.

Hope this helps,

Oreocat
[/img]

[etalianstallion]

Oreocat,

I just browsed through the website for SmarterCase and it looks like they are recommending the 146 series case for the Dell Axim. They even have a picture of it in one:

http://www.smartercase.com/146Dell1.jpg

From your conversation with Tim, I would assume that they are making one to fit the Axim, not just selling a generic case with velcro that would basically fit almost any PPC? If you could try to post the pic again (just make sure you have a valid URL to the pic, and make sure you close the img tag) or give us a better description of the case based on what you have, I'd really appreciate it.

Thanks!

[goirish!!]

8) I've got an email out to Krusell about a ship date for their case. I've had one before and really liked it. As a matter of fact I'm using my Maestro's Krusell case with my Axim right now. Snug fit, slight bow at the sides, but it's better than nothing. As a matter of fact, if the leather stretches a little and the sides relax I may just use this one. All of the buttons are in the right places and I can even use the jog dial. IR is covered but who sends/receives with the thing closed anyway??

At any rate as soon as I get something back from Krusell I'll post it.

[Oreocat]

etalianstallion,

Tim is using the 146 for the Axim. Because I had asked him about a case for the Axim, we made a deal, and I ordered one of his cases and emailed him photos of my Axim in it to see how it would fit. Unfortunately, by the time Dell got my Axim to me, Tim already had his and knew that the Axim fit in it, but not much else.

He is apparently making the Axim case a little deeper, and is removing the note pad. Instead, there will be 6-7 molded areas (not pockets) to hold either SD or CF cards in the previous note pad area.

I'm not sure how to post a picture here, I tried just copying and pasting it, but that didn't work. If you'd like to exchange email addresses, I can send the photo to you direct, or if you're more comfortable, if you can explain how to post the picture here, I'll do that :D

Oreocat

[goirish!!]

etalianstallion,

I'm not sure how to post a picture here, I tried just copying and pasting it, but that didn't work. If you'd like to exchange email addresses, I can send the photo to you direct, or if you're more comfortable, if you can explain how to post the picture here, I'll do that :D

Oreocat

Call me dumb, but I can't figure that out either. I read the instructions on the "help page" but it's just not helping me. Maybe its too early in the morning, but could someone stray from this topic long enough to explain? :oops:

[Steven Cedrone]

etalianstallion,

I'm not sure how to post a picture here, I tried just copying and pasting it, but that didn't work. If you'd like to exchange email addresses, I can send the photo to you direct, or if you're more comfortable, if you can explain how to post the picture here, I'll do that :D

Oreocat

Call me dumb, but I can't figure that out either. I read the instructions on the "help page" but it's just not helping me. Maybe its too early in the morning, but could someone stray from this topic long enough to explain? :oops:

Put your picture out on the web somewhere (I use my web storage allocated to me by my ISP). In your post, use the Image tag to point to your picture...

Let me know if you need more info...

Steven Cedrone
Community Moderator

[Sslixtis]

Adding an image to a post
phpBB BBCode incorporates a tag for including images in your posts. Two very important things to remember when using this tag are; many users do not appreciate lots of images being shown in posts and secondly the image you display must already be available on the internet (it cannot exist only on your computer for example, unless you run a webserver!). There is currently no way of storing images locally with phpBB (all these issues are expected to be addressed in the next release of phpBB). To display an image you must surround the URL pointing to the image with tags. For example:

http://www.phpbb.com/images/phplogo.gif

Hope this helps ;)

Cheers!

[goirish!!]

Thanks to both, I'll give it a try.
8)

[Oreocat]

Thanks to both of you as well.

I probably have a personal site somewhere but I don't know where or how to use it...never needed one before.

However, I did speak with Tim again, and he said he'll be posting the prototype photo on his site in a few weeks, when they're ready to start selling them. For now, he's just selling the original case he makes.

Just so you'll know, the Axim does fit the case pretty nicely, but it's the only thing that will fit into it. The original case is too small depthwise to carry the Axim and a battery, and has no place for cards of any sort.

These are things Tim says he is addressing with the new case, but he hasn't given an exact date as to when they'll be available.

Oreocat

[etalianstallion]

Some new pics available for the Axim X5 case from www.ebcases.com. This looks to be my favorite pick for a slipper case for the Axim. Does take 2-3 weeks to ship since it's backordered...

http://www.ebcases.com/catalog/SlipperAxim_all.jpg

[Doc Phil]

Just you wait, 'Enry Iggins, just you wait! Anybody seen a flip-cover protector similar to those available for IPAQs? Sort of a 1 sided job? I don't want to add more bulk, just keep the front from being scratched....

[Kati Compton]

And preferably removeable, although I know that's probably unlikely. I'd like to have the flexibility to switch between that and a case at will...

[etalianstallion]

Yep, I would like to see the same thing, just like what they have on the iPAQ's....a clear flip cover just to avoid getting scratches on the screen. That way I can look at my appointments for the day without having to open/close anything. And free too...certainly would have liked to see that as an included accessory with the Axim instead of the rubber case.

[etalianstallion]

Dell Axim Cover-Up now available for pre-order from www.thepocketsolution.com. Anodized aluminum covers, no estimated ship date.

http://www.thepocketsolution.com/merchant2/merchant.mv?Screen=PROD&Store_Code=PS&Product_Code=PSCU-110

[bryant]

That looks like a nice cover, but take a closer look.

http://66.155.8.4/merchant2/graphics/00000001/Detail-DellAxim.jpg

Does the cover flip up or down? The top view shows it flipping up, but the side view makes it look like the hinges are on the bottom.

It would also be nice to see the top view to figure out what ports, if any, are blocked by it.[/img]

[Doc Phil]

Bet your sweet bippy that as soon as I order one of those, there'll be a flip top with a clear plastic window that snaps off. Let's wait and see what the vendors think about Dell sales...then maybe we'll see more entries in the cases market...I ordered my WriteShields...

[bgate]

I have the same concerns regarding the hinge and latch mechanisms. If anyone has used one of these, please comment. The small pictures are inconsistent with each other.

I really like the thin form factor, I am concerned about the "bottom latch."

Thanks,
Brent

[Kati Compton]

Does the cover flip up or down? The top view shows it flipping up, but the side view makes it look like the hinges are on the bottom.


I think it hinges at the top, and what you're seeing at the bottom is just the way the lid is held down when closed - it snaps a bit around the case.

[Sslixtis]

I think it hinges at the top, and what you're seeing at the bottom is just the way the lid is held down when closed - it snaps a bit around the case.

I don't know, if you look at the pic with the cover open there doesn't appear to be anything attached to hold it down, and if you go to the site, there is another model that you can rotate that doesn't appear to have a bottom latch/hinge. Got me.

After having said all that, I've pre-ordered the thing and will let you guys and gals know what it's like when I get it :wink:

[erussell]

I just got my new "Slipper" case from www.ebcases.com ($36.95). Very well made and great balck leather. I had a Slipper case for my old Handspring Prism for two years and loved it. Doesn't add much to the size of the Axim.

[Sunnyone]

Looks like we'll have another choice soon. Someone mentioned these a while back and I got this reply back today from Sena.

Sena Cases [[email protected]]

"In about a week, we will announce our new Axim cases. We will notify you
when they are ready.

Regards,
Frank"

[cdcooker]

I got the Dell leather zipper case. It is slightly larger than the cheap one comes with Axim, but a little bit thiner. The build quality is superb, first-class, well worth the $30. The holder design is a lot better than those using velcro. Three credit card slots, 2 memory card slots, and one for money or whatever you like. The only thing that is missing is a holder for pen/stylus. Overall, I love this case very much. It has a Dell logo embossed on the front. The zipper has a Dell logo too. It doesn't look like an ordinary Targus case licensed from Dell. It is made for Axim. The holder has elastic material to hold an Axim with the high capacity battery. With the holder feature, you can take the Axim out or in very easily and fast. I am sure Vaja will make a very nice $70 case for Axim. But all of their cases require to have the PDA inside the case all the time. With the size of Axim, it will be kind of bulky when you use it.

[etalianstallion]

cdcooker,

I agree with your comments on the Dell Leather Case for the Axim. My co-worker has it and it's very good quality. At first I wished that I had ordered it along with my Axim but now I see that all these other 3rd party companies are starting to come out with cases for the Axim. I've waited it out for so long already so why not another few weeks.

The longer I play with the Axim, the more I love it. It's really a great device.

Thanks everyone for keeping all of us Axim owners updated with the cases that are released or that are going to be released in the near future.

[bryant]

Covertec emailed me back saying their Axim case will be available at the end of February:

Hello,

Thank you for choosing Covertec

The Dell Axim case is coming out end February.

Best regards
J. Cortes

http://www.covertec.com

--
Bryant[/url]

[dartman]

Count me in on the positive comments about the Dell leather case. Mine came in a couple days ago and I think it is a great value for the $30. It seems to be well constructed and looks very professional. Gives good protection to the Axim.

I'm not the type to wear it on my belt or even in my pocket, so this style is great for me. At first I wished there was a little more room to carry my wireless CF card, but what I really want is the CF (and BT) embedded in the PPC. Maybe the X7 will fit the bill.

dart

[TheNewSteve]

I am pretty sure I'm getting one from http://www.niteize.com .

It's not too big, but will fit extra battery, WiFi card, extra CF or SD cards, earbuds and probably more.

The elastic bands that are pictured are probably something I will never use and probably remove. They are only used if you are using the case as a stand. Something I thought I would use with a PockeTop Keyboard in landscape mode (as the supplied stand won't do that with the Axim) until I realized how fast I can input text with Letter Recognizer (and I haven't even got the WriteShields yet... hopefully this week).

I like the extra storage, and if I don't want to carry it all, I'll just leave it in my bag and keep the Axim in my pocket with the screen facing in (EMPTY pocket, mind you).

If they had any room, I'd get the EB Slipper or Copilot 20 cases. The slipper for the dell says it has storage "module" pockets, but I haven't confirmed this and have no idea WHERE they would put them. Also couldn't decide between belt/no attachment. The Copilot 20 is pretty small and I think I might like using the naked Axim best, which is why I like the holster designs (Copilot, NiteIze).

-Steve

[etalianstallion]

I don't know, if you look at the pic with the cover open there doesn't appear to be anything attached to hold it down, and if you go to the site, there is another model that you can rotate that doesn't appear to have a bottom latch/hinge. Got me.

After having said all that, I've pre-ordered the thing and will let you guys and gals know what it's like when I get it :wink:

Sslixtis, just wondering if you have received your case from www.thepocketsolution.com yet. If so, can you let us know how that is working out for you? Maybe you can help clarify the top/bottom latch discrepancy on their website. Thanks!

[GoldKey]

Sslixtis, just wondering if you have received your case from www.thepocketsolution.com yet. If so, can you let us know how that is working out for you? Maybe you can help clarify the top/bottom latch discrepancy on their website. Thanks!

I have e-mailed them twice to get some clarification on that exact issue and not gotten a response. I also asked about the shipping date since their website says the axim cover is a preorder. Their case had been my number 1 choice for a while, but just this week while waiting for a response from pocketsolution I discovered the cases at www.grindergear.com and am just about sold on the basecamp although I would really love to hold one before buying.

[Sslixtis]

Sslixtis, just wondering if you have received your case from www.thepocketsolution.com yet. If so, can you let us know how that is working out for you? Maybe you can help clarify the top/bottom latch discrepancy on their website. Thanks

Still waiting, they have billed my Credit Card but I have not seen word one about when they will actually be shipping the cover/case. :?

As soon as I get it, I will post a mini-review here in the Dell Forum :wink:

Cheers!

[etalianstallion]

FYI...new cases are out...

http://www.senacases.com/axim/

...and they look pretty darn nice!

[bryant]

I wonder how the leather cover will affect the recordings. It looks like they didn't make a hole for the microphone (on the top next to the power button).

--
Bryant

[whodat]

I got an EB Cases Slipper case for my old Handera 330 about a year & a half ago, and it was beautifully made. Based on that, I just bought one for my Axim. It's still well made, but perhaps not as nice as the older one.

The fit is good. I don't think the leather is quite as nice, though that may be subjective only. The stitching is definitely coarser. The seams on the old case were inverted, which looked neat & probably reduced the effective size of the case a bit. The new case has everted seams, which gives it a less elegant appearance. I don't know if there is a strength difference, or whether subtle differences in the shape of the PDA dictated the seam type.
The leather connecting the body of the case with the front is much less substantial on the new case, and I am not really thrilled about that. The one bright side to this is that perhaps there will be enough play in this section that I might be able to sneak a CF camera under the flap.

Half of me now wishes I had waited for the Senna case to come out, although I like the EB's magnetic closure better than a snap closure. And also, the Senna cases won't be out for another month.
Ah well, if this case holds up as well as the other, it will have been money well spent anyway. :?

[whistler]

but just this week while waiting for a response from pocketsolution I discovered the cases at www.grindergear.com and am just about sold on the basecamp although I would really love to hold one before buying.

Have to thank you for turning me on to GrinderGear. Bought the base camp. Haven't recieved my Axim but my Palm IIIxe fits.

Quick review.

Padded case a little bulky especially with a cell phone in the outer pocket. Nice zippered pocket, with restraints so the zippered pocket only opens, 90 degrees. Two smaller pockets one zippered in the zippered pocket. The swivel clip is nice doesn't extend over the top of the pants I wear fits over a 3/4 inch belt very well. The cover over the PDA pocket is a little tight for getting the PDA in and out but not terrible. Delivery was very quick. From Washington State to Central New York in less than 2 days. very impressive.

Now Dell would ship my PDA!

Paul Larson

[othell]

I'd been looking for a case that would clip to my belt while not making it seem too bulky with the Axim inside. Someone pointed out the cases from Marware and I ordered one. It fits great.

http://www.marware.com/Holster.html

Only the Large version of the case will fit the Axim. The dimensions on the website basically mimc the size of the Axim (just a little room), and so I was worried about how well it would fit. It is perfect. Works great on my belt and is easy to remove.

[etalianstallion]

Got a reply from Rhino Skin....

---------------------------------------------------------------

Subject:
RE: PDA case for Dell Axim X5?
Date:
Thu, 30 Jan 2003 16:56:38 -0500
From:
"Customer Service" <[email protected]>

We are in the process of developing several cases for the Dell Axim. We anticipate release of a couple of leather styles within the next couple months and then a couple of aluminum style cases shortly thereafter. We will certainly keep you on a list for notification as soon as they become available. You also can visit our website (www.saunders-usa.com) and sign up for our Newsletter to get the latest information plus register for a Rhinoskin case to be given away monthly. Thanks for checking with us!

Regards,
Customer Service
Saunders
800-341-4674
601-693-9819 (fax)
http://www.saunders-usa.com

[Sslixtis]

Just a quick update, My Cover-up from ThePocketSolution supposedly ships today 8O Will post a mini-review here when I finally get it. :roll:

[etalianstallion]

Just a quick update, My Cover-up from ThePocketSolution supposedly ships today 8O Will post a mini-review here when I finally get it. :roll:

Awesome. Looking forward to your review.

[axim400]

Here is a grinder gear basecamp case review. I found it very interesting.
http://www.pdabuzz.com/Reviews/Detailed/GrinderGear.html

[axim400]

Heres another grinder gear basecamp review:
http://www.the-gadgeteer.com/grindergear-basecamp-review.html

[goirish!!]

The Sena cases have a place for a coupon code. Does anyone know what/where this can be had?

[dbman]

I'd been looking for a case that would clip to my belt while not making it seem too bulky with the Axim inside. Someone pointed out the cases from Marware and I ordered one. It fits great.

http://www.marware.com/Holster.html

Only the Large version of the case will fit the Axim. The dimensions on the website basically mimc the size of the Axim (just a little room), and so I was worried about how well it would fit. It is perfect. Works great on my belt and is easy to remove.

Can you verify if it has a rigid insert to protect the PDA screen? Does it come with a snap or a velcro closure? Their web site is confusing on the type they use..

[goirish!!]

This Marware case is a Krusell or vice versa. I've got one for a Maestro that I have been using for my Axim(recycling). It actually fits remarkably well, the toggle switch on the side is fully exposed, all of the front buttons are fine, only thing is that the very top is a little low making it kinda hard to push some of the Wisbar icons, and the speaker is covered. Other than that I can't find a reason to shell out $40 just yet.

Mine has a two position snap. One for a tight fit and one for when you have credit cards, etc stored in the cover to give it more room.

I had emailed Krusell asking about a case for the Axim but have not got a reply yet.

[egads]

I'd been looking for a case that would clip to my belt while not making it seem too bulky with the Axim inside. Someone pointed out the cases from Marware and I ordered one. It fits great.

http://www.marware.com/Holster.html

Only the Large version of the case will fit the Axim. The dimensions on the website basically mimc the size of the Axim (just a little room), and so I was worried about how well it would fit. It is perfect. Works great on my belt and is easy to remove.

Can you verify if it has a rigid insert to protect the PDA screen? Does it come with a snap or a velcro closure? Their web site is confusing on the type they use..

To quote their page:
"NEW!
These slim, fine quality leather cases are designed to fit a variety of PDAs. The cases feature a velcro closure and a removable belt clip. "

So, it has a velcro closure. Yuk, I know. I'd prefer a snap or magnetic.
BUT, the price is right. I may end up getting this one over rthe EBcases Copilot-20. See www.ebcases.com .

[othell]

The closure is indeed velcro. Something that I do not really mind. For some reason I think I prefer velcro over a snap or magnetic one.

Both the front and back of the Marware case I have is rigid. Not exactly sure how rigid since I've never had anything to compare it to. I put my Axim in with the screen facing me, just as an extra precaution in case the the rigid exterior is not rigid enough. Seems to work well thus far.

And if you did not know... The case I have is different than the one goirish talks about.

[egads]

The closure is indeed velcro. Something that I do not really mind. For some reason I think I prefer velcro over a snap or magnetic one.


Velcro works great, but what I don't like about it is when I'm sitting in a meeting or somewhere quiet and you open the flap, "RRRRIIIIIIPPPPP".
I just prefer something a little bit quieter. The case that comes with the Dell Axim could wake the dead...

[dbman]

The closure is indeed velcro. Something that I do not really mind. For some reason I think I prefer velcro over a snap or magnetic one.

Both the front and back of the Marware case I have is rigid. Not exactly sure how rigid since I've never had anything to compare it to. I put my Axim in with the screen facing me, just as an extra precaution in case the the rigid exterior is not rigid enough. Seems to work well thus far.

And if you did not know... The case I have is different than the one goirish talks about.

Thanks, I just placed an order for one. It seems to have all of the features I want in a case.

[othell]

Velcro works great, but what I don't like about it is when I'm sitting in a meeting or somewhere quiet and you open the flap, "RRRRIIIIIIPPPPP".
I just prefer something a little bit quieter. The case that comes with the Dell Axim could wake the dead...

lol... yeah, i can understand that. I've yet to notice this velcro being very loud tho. It's a small patch, so I guess that helps too.

[dbman]

Given the propensity for more noise in todays society, I do not see Velcro as a significant issue. Avoid opening your PDA in the church, temple or theater, and I think you will be OK. :D

[dbman]

Just received the Marware case and it is a perfect fit. The belt clip is a little thicker than I am used to, but its not really a problem. The case has rigid inserts on both the front and the back so you can put the Axim in either way. The workmanship is excellent.

[dbman]

After living with the case over a rather busy weekend, I really like it. Even though the clip is bigger than I imagined it would be, it works rather well. It is easy to release the entire holster without removing the clip from my belt and even easier to clip it back on. I even like the swivel since it allows the holster to align itself.

The only thing they could do to make this a better product is to offer it in something other than black.

[seattlehusker]

It seems the owners of the Marware case are pretty happy. Can I ask which belt clip you chose? Was it the standard clip? Additionally, you ordered the "large" case, right?

I'm contemplating ordering this case but wanted to see if anyone ordered the other clips they show that are extra $$$.

[dbman]

It seems the owners of the Marware case are pretty happy. Can I ask which belt clip you chose? Was it the standard clip? Additionally, you ordered the "large" case, right?

I'm contemplating ordering this case but wanted to see if anyone ordered the other clips they show that are extra $$$.

Yes, the large case is the only one that fits the Axim. I received the standard clip. It is a black plastic clip which has a holster release button. I am not aware that there is an alternate belt clip available.

[fireman2850]

This thread is far too big for me to sit and read the entire thing to avoid repeating something so please forgive me if this has already been stated.
I was looking at the aluminum flip cover that has been mentioned here before but when I found out it was going to rest on the screen and that it was going to cost me $40 with shipping decided to look for something else.
What I found was an aluminum case made by Fellowes at my local Staples.
It is made for the iPAQ 36,37,38,39 series of handhelds.
It flips up and closes with magnets so it doesn't flop open when closed.
The aluminum it is made is easy to bend to fit the Dell inside.
All it requires is a little bending of the arms that hold the PDA in place.
Mine removes easily when I want to use it naked and fully protects it when inside.
It has a pocket in the top for cards, etc but I cut it out of mine for fear of scratching the screen.

http://www.fellowes.com/store/imagePop.cfm?product=PDA%20Aluminum%20Hard%20Case-%20Compaq%20iPAQ<a%20name=74950>%20</a>&amp;pimage=74950.jpg

http://www.fellowes.com/store/index.cfm?selectProductCategory=106,1,105&amp;pCat=220

I found mine at Staples for around $30.
It does require a little bending of the arms to get it just right.
Took me a few tries to get it perfect but wasn't really hard.
Now I dont worry about it when it is in my pocket.
Hope this helps someone.

[etalianstallion]

Thanks for the post....would you mind posting some pics of the Dell Axim in the Fellowes case for the iPAQ?

[fireman2850]

http://tidewaterscale.com/images/img_0614.jpg

[fireman2850]

http://tidewaterscale.com/images/img_0616.jpg

[fireman2850]

http://tidewaterscale.com/images/img_0619.jpg

[fireman2850]

http://tidewaterscale.com/images/img_0622.jpg

http://tidewaterscale.com/images/img_0624.jpg

[Andy Whiteford]

Is the jog dial affected by the case? It looks like it will be a tight fit behind the arm that holds the device in place.

[fireman2850]

Forgot to mention that.
If you look at the picture showing the side that the jog dial is on, you will see that I have the "arm" bent out from the machine a little farther on the top than the bottom.
This lets the Axim slide into the case without pushing the jog button up.
That was really the trickiest part and it wasn't hard at all.
You will not be able to use the jog dial while the PPC is in the case.
Not an issue for me but might affect some people.
Glad you reminded me of that.
Also, let me state that it is not as if you have to do major bending to this case.
It is really just minor stuff to make it a good fit.
I am sure that Fellowes will be releasing something to fit it soon but I just couldn't wait for something to protect my Axim.

[PetiteFlower]

That is EXACTLY the kind of case I want! I was so upset when I saw that Fellowes didn't make this case for the Axim...so it's great that you got it to fit :) Looks like I'd even be able to plug in the sync/power cables with it in the case as long as the cover is open.

Now does the cover flip all the way back or just to the point that's shown in your pictures? If it flipped ALL the way back it would be perfect but even if not I'll probably get it.

[etalianstallion]

Niiiice.... Now that's what I call innovation.

Just curious though...does it add much thickness at all to the Axim? Looks like it's a pretty snug fit from the pictures. Also, I assume that there is some sort of thin padding on the inside of the case, right?

For people who like to use the jog dial, I guess you can always trim down the left side of the case slightly with a Dremel or something.

This may be the best case I have seen so far. Nothing like a home-grown solution. Thanks for sharing your solution with us!

[StarkAZ75]

I saw that aluminum case at Staples the other day, and was wondering if the Axim would fit. Now we know :) I was always somewhat miffed that no matter what PDA I had at any given time, no one made a hard, aluminum case for it. Oh, and I found a website that has that case for 19.99 plus 3.95 shipping. The page is at http://www.styluscentral.com/ I'd also be curious as to whether or not the Rhino Skin aluminum case fits the Axim, as it has a similar connection as the Fellowes one, but with a cover that opens sideways instead of a flip. However, the Fellowes one is cheaper, so I'll probably go with that one.

[Andy Whiteford]

I contacted Fellowes regarding the Aluminium case and they say they have no plans to release a version for Dell Axim. Do these people not monitor the market to see what products are selling well?

[etalianstallion]

That is disappointing news from Fellowes. I am a bit surprised that they have no plans to release a PDA case made for the Dell Axim, particularly given that Dell has snatched up a good chunk of the market share for PPCs just in the last 3 months.

[PetiteFlower]

They only make that case for 3 PDAs--Palm m500, Sony T615, and the IPAQ. Must not be their most successful line, though I don't see why not. Guess more people want organizer-style cases, or something like that.

I love Fellowes as a company though, have you ever tried their keyboard wrist rests? Comfier then any others I've ever felt, I even got one for home and one for work :)

[fireman2850]

The Fellowes case is lined with black felt in both the top & bottom halves. The cover only flips back as far as you see in the last couple of pictures I posted. Far enough to add a CF card or use a wireless card. You can plug in the sync cable for sure while in the case. Don't remember if I have ever plugged in the power cable. I take mine in and out very frequently as I prefer to use my Axim naked and use the case for transfer only. If I am at home or in the office it is out. If I am in public somewhere I use it in the case. Hope this helps.

p.s. Working on the cradle mod to keep from having to use a power cable on it (power it from the USB port.) Somebody will probably beat me to it though if they haven't already.

[PetiteFlower]

Update--the rhino skin case for the Ipaq does NOT fit the Axim. Tried one out at Staples today, the clerk was really cool to open the package for me.

I guess I'll order the Fellowes case from the posted site since I haven't found it in ANY of the stores around here.

[tasha]

At Staples I was able to pricematch techonweb.com for the Fellowes case for $15.99 (I actually got it for under $15 since Staples has the 110% price match). If you go to http://www.pricegrabber.com and enter the model number 74950 you get a list of internet stores selling it. I hope this helps someone else.

[etalianstallion]

Wow, Staples actually did that pricematch for you? I have never had a good experience trying to get Officemax or Staples to do any sort of pricematching.

Maybe I'll just have to try my luck again.

[PetiteFlower]

I would have done that if the staples around here carried it :(

[jgallen23]

I just bought the fellows case and I was wondering if anybody knew of a pair of headphones that will still fit with the case closed.

[etalianstallion]

buy.com (http://www.buy.com/retail/product_jump.asp?sku=10340010) has the Fellowes case for $14.87, but it is currently on backorder.

[etalianstallion]

Alright, just saw that Belkin will soon be selling a leather flip case made specifically for the Dell Axim.

Belkin Leather Case (http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=200589&pcount=&Product_Id=135174&Section.Section_Path=%2F%2FRoot%2FMobileSolutions%2FPDAAccessories%2FCases%2Fct_Id)

Looks pretty nice in my opinion. And not too pricey either. :D Kinda like the ones offered by www.ebcases.com

[StarkAZ75]

Ooo, I like that Belkin one. And it's one of the cheapest leather ones I've seen. too bad they don't have a pic of the cover closed

[etalianstallion]

Exactly my thoughts on it. Very sleek. Complements the Axim rather well, I would say. Even comes with a swivel belt clip. Great features at a great price entry point. :D

I especially like the magnetic closure. The leather case looks to be a nice fit as well. I would have hoped that they include slots for extra CF cards, but seeing that it would be double the thickness of a SD card, that might come a little too close to resting on the screen.

Only thing about these cases is that there isn't anywhere to put a combo pen/stylus. :?

This is making me rethink purchasing the Fellowes aluminum case. I wonder if Belkin will come out with an aluminum case.

[PetiteFlower]

ooooh, nice. I still really want a hard case but this is good cause the cover flips all the way back, and you still get the magnetic closure. And, the price is right. Hope it comes out soon.

[PotPie]

Forgive me if this is a duplicate post, but has anyone seen the Universal Pouch from Vaja? They actually make two versions (small and large). The large one will fit the Axim. It looks really cool and Vaja makes some very nice stuff. Of course, it's not cheap.

www.vajacases.com

On another note, does anyone know if the Axim slipper from EB Cases will fit the Axim with the extended battery. My guess would be no, but I wanted to see if there was anyone out there with the EB case and the extended battery.

[etalianstallion]

I doubt the slipper case will fit the extended battery. Looks pretty snug already with the standard battery.

Also, VajaCases is working on a case for the Dell Axim. They are definitely nice, but a little too pricey for my taste.

[AirTimid]

Forgive me if this is a duplicate post, but has anyone seen the Universal Pouch from Vaja? They actually make two versions (small and large). The large one will fit the Axim. It looks really cool and Vaja makes some very nice stuff. Of course, it's not cheap.

www.vajacases.com

On another note, does anyone know if the Axim slipper from EB Cases will fit the Axim with the extended battery. My guess would be no, but I wanted to see if there was anyone out there with the EB case and the extended battery.

I have the slipper case and I don't see how you could fit the extended battery in there. It's pretty snug with the regular battery. BTW, I love this case and I really like the belt clip. There are no "cheap" qualities to the case or clip. Great buy with the 20% off (Christmas Special).

[egads]

Forgive me if this is a duplicate post, but has anyone seen the Universal Pouch from Vaja? They actually make two versions (small and large). The large one will fit the Axim. It looks really cool and Vaja makes some very nice stuff. Of course, it's not cheap.

www.vajacases.com

On another note, does anyone know if the Axim slipper from EB Cases will fit the Axim with the extended battery. My guess would be no, but I wanted to see if there was anyone out there with the EB case and the extended battery.

I have the slipper case and I don't see how you could fit the extended battery in there. It's pretty snug with the regular battery. BTW, I love this case and I really like the belt clip. There are no "cheap" qualities to the case or clip. Great buy with the 20% off (Christmas Special).

Can you still get the discount ?
Can't find it on the web site...

[AirTimid]

I believe the discount ended Jan13, you had to spend a minimum of $60 I think. I decided to get the travel kit with it. I love that too. I almost use the travel kit exclusively for charging and syncing. I rarely use my cradle these days :(

[PotPie]

I was wondering if vaja was working a case for the Axim so thanks for the information. Although they are very expensive, I might have to spring for one when the come out. Although, it is kind of hard paying close to 1/3 the price of the Axim for a case!?!?!?!

Anyway, right now, I am using the Dell leather zippered case. It does a really good job :lol: and is made for use with the extended battery, which I use most of the time.

Thanks to all for the posts on the EB case as well. :D

[PetiteFlower]

$70 for THAT???

Forget it!

[egads]

$70 for THAT???

Forget it!

Its really about $90 :crazyeyes:
$70 is that starting price, you have to select several option that will bring it up to close to $90.

Like you said, forget it, no case is worth that much. For $90 I'd expect a matching wallet, belt, and cell phone case...

[PetiteFlower]

For $90 I'd expect a lot more then that....like sexual favors at least!

Sheesh they must think that ppc owners are a bunch of saps with way more money then they know what to do with.

[etalianstallion]

For $90 I'd expect a lot more then that....like sexual favors at least!

Hey now, Vaja just makes the PDA cases. Whatever you choose to do on your own time with your own PDA case should really not be anyone else's concern and is probably best left unsaid in this forum.... :eek:

All kidding aside, I still like the Belkin one the best. I'm sure that Vaja will come out with one sweet case, but like I said, $70 is just waaaay to much for me to spend on a case. I could very well spend the extra money on getting one of those sync+charge cables and still have money leftover to get a pen/stylus combo.

[Rirath]

Ya know, I had never considered getting a case but that Belkin Leather Case is a REAL beauty! It looks so much better than the Vaja cases in my opinion. Dang... I'm impressed. The Vaja link on the main page had me looking for price info. Ouch. That Belkin is very fairly priced.

[etalianstallion]

The Belkin is pretty sleek. I originally wanted to get something that will accomodate an extra stylus and preferrably something that is a hard case, but the looks of the Belkin and the price has changed my mind.

From my perspective it looks better than the Vaja case, and if the pictures are true to the product, that looks like one finely-crafted product. Heck, the Vajacase looks like an upscale EBcase.

Man, can't wait for it to come out. Wish Belkin would release the product soon.

[pocketpc67]

It's way too expensive. it's not like I am buying a wool or leather jacket on sale that I can wear for a couple of years. The case will be outdated in 1 year when I trade in for a better model. I rather just wait for a metal case to come out for 1/2 the price.

[PetiteFlower]

I'm really torn between the metal IPAQ case and the Sena leather case. Good thing I won't be able to afford either for a while yet :)

[Beerglass]

Looks like Krusell have launched their case for the Axim...

http://www.krusell.se

[etalianstallion]

Dell now offers another case for the Dell Axim....looks like the leather case but now made with PVC material. Now only $8.10 (normally $9).

http://accessories.us.dell.com/sna/images/products/large/310-2939.jpg

Manufacturer Part# 0X513
Dell Part# 310-2939

The normal leather case is on sale too now for $22.50 (normally $25)....

http://accessories.us.dell.com/sna/images/products/large/310-2924.jpg

Manufacturer Part# 9W881
Dell Part# 310-2924


Still waiting for Belkin to release their case....why such a long wait!!!!

[taxus]

Looks like Krusell have launched their case for the Axim...
http://www.krusell.se

ExecutivePDA (http://www.executivepda.com) (a.k.a. Land & Sea Wireless) sells Krusell cases, so I guess the Axim Handit case will be available in the coming weeks.

They offer top-notch service. They just replaced my Krusell Toshiba e310 Handit case with a new one, while I bought it last July.

I'd gotten a Multidapt Miniclip with it, but it clips the belt pretty hard, and after some time the plastic clip holder on the case broke. The Multidapt Slide Swivel kit is better than the Miniclip for PDA cases, and it's the clip ExecutivePDA now provides with PDA cases. I've only had it for 3 days, but I like it a lot better than the Miniclip.

[GoldKey]

Dell now offers another case for the Dell Axim....looks like the leather case but now made with PVC material. Now only $8.10 (normally $9).

http://accessories.us.dell.com/sna/images/products/large/310-2939.jpg

Manufacturer Part# 0X513
Dell Part# 310-2939


I am wondering if they got the picture wrong. While it looks just like the leather case, the description is completely different. They call it a slip case rather than a zippered case. Based on the description, I bet it is really the same as the case that comes with the unit.

[etalianstallion]

I am wondering if they got the picture wrong. While it looks just like the leather case, the description is completely different. They call it a slip case rather than a zippered case. Based on the description, I bet it is really the same as the case that comes with the unit.

Goldkey, thanks for catching that. I think you are right--this was probably just another picture of the $25 leather case. Now why would Dell go and sell those funky PVC cases?

[garretwp]

Has anyone notice that the Sena case has been pushed back to the 27th and not today the 25th? I wonder why they did that? I guess maybe for the reason they have to many orders to fill?


Garrett

[Beerglass]

Looks like Krusell have launched their case for the Axim...
http://www.krusell.se

ExecutivePDA (http://www.executivepda.com) (a.k.a. Land & Sea Wireless) sells Krusell cases, so I guess the Axim Handit case will be available in the coming weeks.

They offer top-notch service. They just replaced my Krusell Toshiba e310 Handit case with a new one, while I bought it last July.

I'd gotten a Multidapt Miniclip with it, but it clips the belt pretty hard, and after some time the plastic clip holder on the case broke. The Multidapt Slide Swivel kit is better than the Miniclip for PDA cases, and it's the clip ExecutivePDA now provides with PDA cases. I've only had it for 3 days, but I like it a lot better than the Miniclip.

Thanks for the tip. I ordered the new Krusell axim case last night, at $31 with UK delivery how could I resist? I really liked the Sena cases but they stacked up to $50+ by the time international delivery was added. It comes with the mini-clip, so I'll see how I get on with that. Having a quick look around the ExecutivePDA site I notice the multitude of clips and adapters available so I can always just order one of the other ones later on. The vehicle mount looks good too, I was wondering about something like that for either playing MP3s in the car, or so my wife can watch DivX movies on the go.

[etalianstallion]

Moonlight Technologies Dell Accessories (https://ssl32.securedata.net/moonlight-tech/shopping/shopdisplayproducts.asp?id=33&cat=PDA+Accessories+%2D+Dell)

They also carry the Krussel case for the Axim. Get your sync/charge cable and case all in one place.

[PetiteFlower]

I wrote to Belkin yesterday to ask if there was a release date for their flip case, and they wrote me back(within an hour!) and said:

Dear Sir or Madam;

Thank you for your inquiry with Belkin. This product is expected to be available within the next couple of weeks. I encourage you to check back with us mid part of next month for a more firm release date. Please fell free to respond with any additional questions.
Have a great day!

I think I'm going to wait for this one, I like the magnetic closure better then the snap that the sena has, and it's a lot cheaper then the EB case version.

[Sunnyone]

I received my Sena Axim case. I'm very happy with the quality for the price. The case fits the Axim really well - the screen is centered right in the opening. All buttons, the jog dial, record button, headphone jack are easily accessible. For some reason I didn't recall that the headphone jack was accessible with the case closed. I've had cases for my iPAQ that were more expensive than the Sena and they didn't fit nearly as well. Also, the headphone jack wouldn't stay in place with the iPAQ case closed. No such problem with the Sena Axim case. All in all - an attractive case at an affordable price.

[bgate]

Just thought I would let my friends at PPCT know that I got my new VAJA case. Yes, expensive, yes worth it. It is beautifully made and fits the Dell like a glove. I was concerned with some of the other cases I saw (pic wise) and the fit. I also wanted a case that the cover could be flipped out of the way (not just hang there). All ports accessible and ready to go. Adds a tick more thickness than I thought it would-but is a winner.

[PotPie]

bgate,

Which vaja case did you buy. In looking at the ones with the magnetic closures, I am wondering if I need to order one of the custom ones or if the "premade" one will work for me. I want all black so the "premade" one will work in that regard, but in looking at vajacases.com, I can't figure out if the reset button, voice recorder, and side scroll button are accessible in the case that is available for immediate delivery. In looking at the custom cases, even in all black, it appears that they start out at about $20 more than the "premade" one.

I guess my question then is "Do you have to order the custom case to get the access to all functions or will the "premade", ready to ship one give me that????"

Any input on this would be appreciated. I know that vaja cases are expensive, but the ones that I have seen in person are very nice and pobably worth the money. Thanks!

[Hx4700]

Hi Potpie,
I have gotten several cases from Vaja over the years. Axim is on order.
The cutouts for sync plug, speaker (new models have a metal screen), jogwheel, mic, power jack, power button, and reset buttons are standard on all the patterns. Sometimes the hole for the headset plug is on the basic model as well.
The SD slot appears to be standand on the Axim pattern.
What you probably won't get on the basic model is the CF cutout, the SD storage slots, the credit card slots, and same leather inside as lining.
For some reason they don't ususally have a cutout for the IR.
An extra CF storage slot would have been nice. I plan to put a spacer in one of the CC slots and use it for an extra CF card.
Ron...

[bgate]

PotPie,

The above response is mostly correct. All cutouts are there for you- Sync, Power, Reset, VOX, Side Scroll, SD card, and even headphone jack. I was concerned if the headphone jack was going to be there-it is. Very pleased with construction. Inside has space for credit cards and 2 SD cards. Let me know if you need more info.

Brent

[Jonathon Watkins]

Bgate, could you give us a bit more of a mini review of the Vaja case? I am interested in getting one and would like a bit more info if you are up for it. :D ta.

[etalianstallion]

Dangit, they raised the price for the Belkin Leather Flip case for the Axim before it was even released. Went up to $31.99 from $24.99. What gives?!?!?

[Jonathon Watkins]

$24.99 was always going to be really cheap. $31.99 still sounds fair, though they had better not raise the price any more! :!:

[etalianstallion]

Ditto. $24.99 made this an awesome leather case. $31.99 makes this just another leather case. You're right though--this is a fair price, but I would have had no hestitation buying it for $24.99. Now I have to think if I really want it or not.

Maybe Belkin figured out how popular the Axim is and figured they could make a killing off this thing. I'm still waiting to see the case in the stores, or even sold by Dell since I thought that they already offer Belkin cases for other PDAs.

[bgate]

Sorry to ignore you PDA G, I have been super busy. I will try to get a review out in the next couple of days.

[PetiteFlower]

Or maybe production costs turned out to be higher then they thought.

In any case(no pun intended!), I will be giving more serious consideration to the innopocket case now. Still undecided, I like the metal but the cover doesn't flip all the way back. We'll see though.

[etalianstallion]

Or maybe production costs turned out to be higher then they thought.

In any case(no pun intended!), I will be giving more serious consideration to the innopocket case now. Still undecided, I like the metal but the cover doesn't flip all the way back. We'll see though.

That crossed my mind too, but I took at look at the pricing for all the PDA cases they offer. Basically the leather cases come in at $19.99, with the exception of the leather binders/wallets. Only the hard cases come in a a higher price, which makes me wonder why the increase in price. In any case, I emailed Belkin to ask about the price change--if I hear back from them I will post it here.

I too am now giving the aluminum cases as well as other leather cases a second thought.

[luebster]

Has there been any indication when the Belkin case will be available? I'm getting tired of waiting. That pathetic excuse for a case that ships with the Axim is really starting to show its bulk... 8O

[etalianstallion]

Has there been any indication when the Belkin case will be available? I'm getting tired of waiting. That pathetic excuse for a case that ships with the Axim is really starting to show its bulk... 8O

The last I heard was that they would be available for order on Belkin's site sometime in the first/second week of March, so anytime now. I'm not sure if that means that they will ship out immediately though.

[etalianstallion]

The wait is over...the Belkin flip leather case is now available from Dell (among other Belkin accessories for the Axim).

Belkin Flip Leather Case for Dell Axim (http://accessories.us.dell.com/sna/ProductDetail.aspx?category_id=188&keyword=&mnf=&prst=&prEnd=&sku=A0095049&mnfsku=&SearchType=&Page=productlisting.aspx&spagenum=1&Pageb4Search=&InStock=&items_per_page=25&orderby=&image_flag=True&refurbished=&c=us&l=en&cs=19&iCompatid=)

Manufacturer Part# F8D1401x
Dell Part# A0095049

Price is at $29.99. Anyone know of any Dell coupons to apply here? No free shipping here, at least not from what I can see.

[PetiteFlower]

Buy it direct from Belkin, yeah the price went up but shipping is free so it's still way cheaper then to buy from Dell. I'd have to pay tax from Dell too, so it would cost me $37.62 all told. Gonna place my order tomorrow :)

Who knows though I may end up getting one of the aluminum cases too, for times when I need more protection. But this should do me good for now :)

[etalianstallion]

Buy it direct from Belkin, yeah the price went up but shipping is free so it's still way cheaper then to buy from Dell. I'd have to pay tax from Dell too, so it would cost me $37.62 all told. Gonna place my order tomorrow :)

Who knows though I may end up getting one of the aluminum cases too, for times when I need more protection. But this should do me good for now :)

Thanks for the tip. I didn't realize that Belkin has it available on their site now too.

Here is something you will enjoy... a coupon for your purchase! I saw this coupon last week for 35% off of $25+ orders + free shipping, but it was supposed to expire on March 7. Nevertheless, I entered the coupon code and it accepted it, so I ordered the case for less than $23 shipped (after taxes). Here is the coupon code:

48567

I'm not sure if they will actually push the order through, but heck, I'm crossing my fingers.

[tucker26]

:way to go: Thanks for the code etalianstallion. I just ordered mine. The coupon seems to have worked even through my Canadian order. Shipping is $11.50 USD, but I'm willing to pay it since it hasn't shown up on Dell Canada's site yet. :roll:

[PotPie]

Just wondering if anyone knows where I can find a picture of the back of the Belkin Case. I like the case design, but I really don't want one with a belt clip and it appears that the Belkin one does have a belt clip.

[tucker26]

Just wondering if anyone knows where I can find a picture of the back of the Belkin Case. I like the case design, but I really don't want one with a belt clip and it appears that the Belkin one does have a belt clip.
I don't know of any pictures of the back of the Belkin case, but I talked to a Belkin rep that said the swivel clip is removable just like any of their cellphone cases. He also told me that there are cut outs for all of the components on the side (sd slot, toggle switch etc.).

[Jonathon Watkins]

I tried that Dell coupon code a few seonds ago. It said it was invalid. :cry:

Any ideas?

[PetiteFlower]

Yeah, someone realized that an expired code was still active and they fixed it. *shrug*

I hope that there's not a "button" sticking out of the back for the clip to attach to....it would be nice to have one and I might use it sometimes but I wouldn't want a bumpy thing in my pocket when I'm not using the clip....

[Jonathon Watkins]

Such is life. I've ordered it anyway. Let's hope it's worth it (not hard at that price). :P

[etalianstallion]

I tried that Dell coupon code a few seonds ago. It said it was invalid. :cry:

Any ideas?

It's actually not a Dell coupon. It's for the Belkin website. I tried it just now and it still works.

[Jonathon Watkins]

:oops: Ooops. Oh well, it's bought now with a few other things. :?

[etalianstallion]

Whoo hoo!! Looks like my Belkin case is on a delivery truck heading towards my house. :rock on dude!: I'm looking forward to my sleek leather case to replace the clunky case that came with the Axim. Should be here Thursday or Friday.

I'll post a short review here once I receive it. If anyone else already received theirs, go ahead and post a review! 8)

I see that demand is good on this case seeing that Belkin is already putting the item on backorder and providing a link to Dell's site to order the case.

[Andy Whiteford]

Guys.
I have been sent a few different case samples for the Dell Axim and I hope to post the majority of these reviews on this site.

Innopocket Aluminium Case (read Proporta and Rhinoskin as well)
Covertec leather case
Caseworks leather case
Nutshell leather holster

Also Coverup from Pocket Solutions which I reviewed for another site. If you are interested in this one, let me know and I will post the link.

[Pat Logsdon]

I received my Vaja (Large) Universal Pouch the other day, and I LOVE it. The quality is really top-notch. The Axim fits in a pouch (basically the same as a slipper but with no cut outs), there's a leather pocket sewn onto the front of the pouch for a CF card (my Socket WLAN card fits perfectly), and then there's a flap that covers the whole thing. All told, it's only about as thick as my old e125 case (also from Vaja).

It was $98 shipped, but definitely worth it in my opinion. 8)

[etalianstallion]

Guys.
I have been sent a few different case samples for the Dell Axim and I hope to post the majority of these reviews on this site.

Innopocket Aluminium Case (read Proporta and Rhinoskin as well)
Casetech leather case
Caseworks leather case
Nutshell leather holster

Also Coverup from Pocket Solutions which I reviewed for another site. If you are interested in this one, let me know and I will post the link.

I look forward to seeing your reviews on these cases, especially the aluminum case. Thinking about getting that one as well in addition to the Belkin case I already have on order.

[etalianstallion]

Okay, so I received my Belkin case, and to be honest, I was disappointed. :( No doubt that it is definitely better than carrying around the standard case supplied by Dell, but the Belkin case certainly did not live up to my expectations. May be placing my order for the aluminum case soon... :?

Anyway, here's a short review.

The cut-out for the button is slightly different than what is pictured. There is an additional notch where the speaker is. I personally would have preferred that they had it the way it was shown on their website.

The little knob on the back of the case for attaching the belt clip is not removable. Well, technically, you could remove it by taking out some of the stitching. It is only 3/4 cm in diameter and 1/2 cm "thick".

The fit of the case is decent. I really had to try and stretch and move the case around to make it a good fit and to get the screen aligned in the cut-out. However, once I got the screen aligned in the cutout, the flip part of the case does not align well (it is slightly to the right) and the cut-out for the headphones is not aligned. Argggh.

The flip portion of the case is held down by 2 magnets as they advertised. However, since the fit is not that good, and the magnets are not that strong, the flip portion tends to stay open unless you really stretch it.

The overall quality and workmanship is not all that great. The stitching is not straight where it should be, and well, you toss in all the other things I mentioned, and, IMHO, this case is slightly disappointing.

Anyone else get their Belkin cases yet? I'd like to see if you have the same thoughts. Maybe, just maybe, I got a "defective" product.

[egads]

Okay, so I received my Belkin case, and to be honest, I was disappointed. :( No doubt that it is definitely better than carrying around the standard case supplied by Dell, but the Belkin case certainly did not live up to my expectations. May be placing my order for the aluminum case soon... :?
The overall quality and workmanship is not all that great. The stitching is not straight where it should be, and well, you toss in all the other things I mentioned, and, IMHO, this case is slightly disappointing.
Anyone else get their Belkin cases yet? I'd like to see if you have the same thoughts. Maybe, just maybe, I got a "defective" product.

I do not personally have one, but a someone I work with has one and its pretty much the same as yours. He was very disappointed also. I was not surprised, all of the Belkin cases I've seen in CompUsa are very cheap looking.

I just received a Covertec case from my X5. I love it. Check it out at: http://www.covertec.com

I'm leaving from a trip to Texas on Sunday, if I have time I'll take a few pictures and write a small review of it before I go.

I also have a Marware Holster: http://www.marware.com/Holster.html
I have two cases because most times I do not want a belt clip and the Marware has a belt clip. The Covertec does not have a belt clip and fits the X5 much better than the Marware. See my short review of the Marware case: http://www.pocketpcthoughts.com/forums/viewtopic.php?t=8666&highlight=

Happy X5 case hunting 8)
:byebye:

[PetiteFlower]

Man, I had such high hopes for the belkin too. Guess I'll be waiting a bit longer...

[KiLLiN-TiMe]

I also got the belkin case. as you said it is not the best workmanship ive seen.
Here is what I did to get a better fit.
I ran the leather under some hot water for a few minutes and then dried off the excess water. Then I got everything lined up pretty good and put my axim in it over night and let it dry.
The head phone hole is off a small bit but is close enough it is useable.
The case also closes now.
You might try that out and see if it helps. :way to go:

[egads]

I also got the belkin case. as you said it is not the best workmanship ive seen.
Here is what I did to get a better fit.
I ran the leather under some hot water for a few minutes and then dried off the excess water. Then I got everything lined up pretty good and put my axim in it over night and let it dry.
The head phone hole is off a small bit but is close enough it is useable.
The case also closes now.
You might try that out and see if it helps. :way to go:

You may want to stick the Axim in a baggy or something if you do that. Some clear plastic wrap would not add any thickness to the Axim. If you dry off the excess water it may be OK, but I would error on the side of caution...

[davee4422]

I had spent a fair amount of time looking at the many cases people have suggested on this forum. I have to say that I kept coming back to the Dell leather case as meeting every need I had. I wanted it to be leather, flip to the side, not be too big and to look nice. I ordered and recently received the Dell leather case (only $25!), and it's absolutely wonderful! I think the workmanship is good, the Axim goes in and out of it with no difficulty, it holds it firm, and it looks great! Some of the other ones look nice also, but I have to say I'm sold on the one Dell makes! (I also just got their foldable keyboard, and I love that too! Now if I could just get ActiveSync to work!!)

[etalianstallion]

I also got the belkin case. as you said it is not the best workmanship ive seen.
Here is what I did to get a better fit.
I ran the leather under some hot water for a few minutes and then dried off the excess water. Then I got everything lined up pretty good and put my axim in it over night and let it dry.
The head phone hole is off a small bit but is close enough it is useable.
The case also closes now.
You might try that out and see if it helps. :way to go:

Not a bad idea. Here's what I did when I got home from work. I usually detail my own car when I have time, including the interior, so I had a bottle of leather conditioner handy. I "conditioned" the leather and stretched/tugged to make it fit, and, well, it's not bad. Maybe it's just going to take some time before I break it in, but it's getting better already. I did have some high expectations when I purchased this case and didn't quite expect to have to go through all this trouble.

Having said that, I am searching for a case for my girlfriend. We both got the Axim when it came out. I'm going to look into the Piel cases. The Covertec ones look nice too. I thought about the EB cases but have heard some nasty things about their customer service. Well, we'll see.

[etalianstallion]

I had spent a fair amount of time looking at the many cases people have suggested on this forum. I have to say that I kept coming back to the Dell leather case as meeting every need I had. I wanted it to be leather, flip to the side, not be too big and to look nice. I ordered and recently received the Dell leather case (only $25!), and it's absolutely wonderful! I think the workmanship is good, the Axim goes in and out of it with no difficulty, it holds it firm, and it looks great! Some of the other ones look nice also, but I have to say I'm sold on the one Dell makes! (I also just got their foldable keyboard, and I love that too! Now if I could just get ActiveSync to work!!)

My coworker ordered the same Dell leather case, and yes, it is quite nice, especially for $25. Good quality/workmanship, fits well, and has extra space for a pen or notepad or CF cards. I may purchase that for myself in case I want to travel and am only going to bring the Axim with me on a trip and not a laptop.

[PotPie]

I also have the Dell leather case. I love it, especially since I have the extended battery :D . I actually ordered the Dell leather case at the same time as my Axim (around the first of December). It is holding up very nicely :!: and I do like the extra room it provides. However, I have been looking for another case, because I like the kind that flips up (like the vaja). I think I would like the vaja case with the magnets, but don't want to drop $100 :devilboy: on it. I'm not fond of the case from EB Cases and it seems that EB is not doing so well in the customer service area anyway. The covertec case looks nice, but would love for someone that is using one for the Axim to do a review. Although I really don't like the snap closure I may be willing to live with it if the case is a great fit and the quality seems to be very good as well.

[cyclonus]

I'm set to get my Dell in about a week. Just wondering if anyone knows of any case that has a belt clip on it?


TIA - Adam

[Simone]

What I'm looking for is a small case that will accommodate both the Axim and the Dell folding keyboard...anyone seen one of those?

Simi

[Andy Whiteford]

This site may have something suitable:

http://www.roadwired.com/

[seattlehusker]

So, a few people have pointed out the Krusell case but nobody has posted a review. Has anyone got their hands on one of the Krusell cases yet that wouldn't mind posting a review?

[ppcvidz.com]

Do they make a case that could be clipped do the dash of a car or such and be used with a GPS unit?

[Dawson]

I purchased the Covertec case for my Axim. I love it. Very attractive case. Does not add much size to the unit. I wanted a case to protect my Axim and to replace my wallet. The Covertec case has 3 slots for credit cards or business cards. I use 2 slots for credit cards and put cash in the last slot. It also has 2 slots for SD cards.

MobilePlanet (http://www.mobileplanet.com/product.asp?dept%5Fid=3704&pf%5Fid=MPC00069&listing=1) has them for $39.95

[egads]

I purchased the Covertec case for my Axim. I love it. Very attractive case. Does not add much size to the unit. I wanted a case to protect my Axim and to replace my wallet. The Covertec case has 3 slots for credit cards or business cards. I use 2 slots for credit cards and put cash in the last slot. It also has 2 slots for SD cards.

MobilePlanet (http://www.mobileplanet.com/product.asp?dept%5Fid=3704&pf%5Fid=MPC00069&listing=1) has them for $39.95

I've had the Covertec for about a week now and I love it also. I hope to take some pictures and post a mini review sometime this week...

[etalianstallion]

I purchased the Covertec case for my Axim. I love it. Very attractive case. Does not add much size to the unit. I wanted a case to protect my Axim and to replace my wallet. The Covertec case has 3 slots for credit cards or business cards. I use 2 slots for credit cards and put cash in the last slot. It also has 2 slots for SD cards.

MobilePlanet (http://www.mobileplanet.com/product.asp?dept%5Fid=3704&pf%5Fid=MPC00069&listing=1) has them for $39.95

The CoverTec does not have a belt-clip, right?

Also, I'm looking at getting either the CoverTec, Piel Frama, or Sena case for my girlfriend. Anyone here who can make a recommendation?

[smbruce]

I purchased the Covertec case for my Axim. I love it. Very attractive case. Does not add much size to the unit. I wanted a case to protect my Axim and to replace my wallet. The Covertec case has 3 slots for credit cards or business cards. I use 2 slots for credit cards and put cash in the last slot. It also has 2 slots for SD cards.

MobilePlanet (http://www.mobileplanet.com/product.asp?dept%5Fid=3704&pf%5Fid=MPC00069&listing=1) has them for $39.95

The CoverTec does not have a belt-clip, right?

Also, I'm looking at getting either the CoverTec, Piel Frama, or Sena case for my girlfriend. Anyone here who can make a recommendation?

I can't give you a comparison I'm afraid, but I chose Piel Frama and have put some pictures here http://www.broadsman.btinternet.co.uk/pielframa.htm

Steve :D

[Andy Whiteford]

I have a few samples of cases for Axim but unfortunately I can't just come out and say which ones seem the best without first publishing a full review of the case. Most of the reviews should appeatr on this site in the coming days/weeks but in the meantime if you do have any concerns over a particular case, please post here and I will answer if possible. Things like is the soft reset accessible isa reasonable question that I can answer upfront.

[PromoGuy]

So of all these cases, is the one from CaseTechworks.com the only one that will fit in the charge/synch cradle with the Axim inside?

That, a flip-snap closure and belt clip are pretty much my criteria. Looks like the CaseTechworks case has most all I need. Just wanted to be sure there weren't others that fit in the cradle too.

[Brad Adrian]

Belt clips are a pretty easy thing to add, though. You can find them at BestBuy (and sometimes Lowes). Don't rely on the self-adhesive backing to hold up, though, and make sure you use the right kind of adhesive, something flexible (like silicone cement) and not rigid like epoxy. I've found that the rigid glues don't hold nearly as well to a flexible surface like leather.

[etalianstallion]

So of all these cases, is the one from CaseTechworks.com the only one that will fit in the charge/synch cradle with the Axim inside?

That, a flip-snap closure and belt clip are pretty much my criteria. Looks like the CaseTechworks case has most all I need. Just wanted to be sure there weren't others that fit in the cradle too.

Wow, I have never seen this. I didn't know that there was a case that would fit in the cradle with the Axim in the case. Wish I knew about this before purchasing the Belkin case--I didn't know they had this!!! Anyone own this case? If you do, please post some pics/reviews. The pictures from the website aren't that telling.

Actually, I was looking for a case that doesnt' have the belt-clip attachment. It's not a big deal, but I don't really like the little protrusion on the back of the case.

[PetiteFlower]

The pic on the site actually looks pretty shady to me, it doesn't look like the Axim is actually IN/connected to the cradle! I'd want to hear from someone who actually saw this work before I'd go out and buy this case.

[Andy Whiteford]

Okay, re: the Casetechs leather case, you can sync using the cradle with this case on the Axim and they also sent me two versions, one had an additional compartment for a spare battery. I haven't done a full evaluation on this case yet so hold tight for the review but first impressions show it does what they claim!

It's the only case I have receved thus far that allows use of the cradle unless you also consider Pocket Solutions Cover Up which isn't strictly a case but may provide enough protection for your needs.

[PromoGuy]

E-Stallion,

So far, I've only seen this review by PocketGoddess (http://www.pocketgoddess.com/reviews/pocketpc/20030320_1600_ctw_axim.htm).

She seems to like the case quite well. There are a few downsides, like the record and reset button being covered. Guess we can't have it all.

The only thing that seems odd is the lack of protection on the sides, where the rubber grips are. Then again, they are rubber so they don't really need protection.

Andy W. indicated on his 3/18 post here that he has a "Caseworks" case and will post a review at some point. Maybe he meant the Casetechworks model. If so, then maybe he can shed some light on this.

[Andy Whiteford]

Yes, that was a mispel!
It should read casetech.

[PromoGuy]

Thanks Andy for the micro-review. :wink:

BTW, I would like to read your review on the Coverup from Pocket Solutions. Did you ever share that link?

[Andy Whiteford]

Go here:

http://www.ultimatepocket.com/index.php?newlang=eng


On the left under reviews/accessories. Let me know what you think.

[PetiteFlower]

Thanks for the confirmation Andy :) I wish they had better pictures on the site!

Anyway, so if you tried all these cases, which one are you actually going to keep/use on a regular basis?

[Andy Whiteford]

Still got a couple to try out i.e. Vaja and Piel Frama. Out of all the cases I have looked at so far, they are all good apart from one which has a serious issue in my opinion. I won't say more until I have given them all a fair evaluation.
What are you looking for in your case/cover?

[PromoGuy]

Nice review Andy, thanks for linking it.

The case I hope for would have a flip cover that snaps closed, and snaps in place when flipped back. I like how you can make the cover a handle to hold the PPC. A belt clip (maybe one that comes off), access to all the buttons and slots, and doesn't draw a lot of attention (working in an office setting, the more it looks like a phone the better).

Synching in the cradle while in the case would be nice, but isn't a deal-breaker.

For now I am using the VisorPhone case (http://www.handspring.com/products/Product.jhtml?id=740&cat=30009) that Handspring sent with my phone. It is a snug fit and you have to remove the PDA to use the buttons, but it works until I get something make for the Dell.

$35 would be the sweet spot but for the right one I could go as high as $60...maybe.

[PetiteFlower]

Me? Magnetic closure, NO snaps or velcro, space to hold memory cards and maybe credit cards, no annoying protrusions like a belt clip, and very slim. My ideal case would be a hard aluminum case that opens top to bottom with a cover that flips all the way back, but a leather slip case that does that would be almost as good. I was going to get the Belkin case but then some people said that the quality/fit weren't all that great, so now it's probably going to be the Proporta. I refuse to spend more then $40 at the absolute most on a case. But I'm going to wait for your full comparison before I decide :) Vaja and Piel Frama are right out for me anyway due to cost!

[smbruce]

...no annoying protrusions like a belt clip...

PetiteFlower

This won't help you as you've already ruled out the Piel Frama because of cost in the US, but it night help someone else.

I sometimes want a belt clip, but often just want to put my Axim in a jacket pocket, and I too was worried that some cases had a large "knob" to which the belt clip would attach, which would snag on clothing or be uncomfortable.

Having gone for a Piel Frama Case, I can tell you that the belt-clip connector protrudes only 2mm from the case (in fact slightly less than the magnetic closure flap) and is not at all uncomfortable.

Steve 8)

[Andy Whiteford]

Having gone for a Piel Frama Case, I can tell you that the belt-clip connector protrudes only 2mm from the case (in fact slightly less than the magnetic closure flap) and is not at all uncomfortable.

I agree with this statement. The back of the case is quite padded and the the connector sinks into this a little when not in use making it less obstrusive.

The only cases I have received so far that are magnetic are the Covertec and Piel Frama however they are still the type that flip under the rear of the case and close on the back, kind of like a magnetic snap. The Coevertec has a small metal plate on the back, the Piel Frama's is embedded in the leather. I know Vaja have a front fastening magnetic case but I have still to receive it yet.

The only two solutions that allow you to sync in the cradle without removing them are the Cover Up from Pocket Solution, not strictly a case and the offering from Case Techworks.

InnoPocket, Rhinoskin and ProPorta have all released an aluminium case for the Axim but these are all identical and made by the same manufacturer.

I'll keep you posted as the reviews are posted and thanks for the patience as it's not fair to put my findings down here when these vendors are all expecting a full evaluation.

[PetiteFlower]

Now my next question is, how can I get your job???

[Andy Whiteford]

lol. Just enjoy writing about the subject i.e. Pocket PCs and all things related. While it's great to see all the different solutions, I'm still only ever going to use one or two.

[Steven Cedrone]

Now my next question is, how can I get your job???

You needed to be here a few months before you registered... A call went up throughout the land for reviewers (http://www.pocketpcthoughts.com/forums/viewtopic.php?t=4514)!!! :wink:

Steve

[PetiteFlower]

I know, one of my friends(Jordan) got picked for your review team, that's how I found out about the site!

If you ever need any more though, I'll definitely sign up!

[etalianstallion]

I was browsing through AximSite and found some case reviews (http://www.aximsite.com/reviews/index.php?catid=15) in case (no pun intended) anyone is interested.

[robert_biggs]

Man, that Vaja flip top case with magnetic closures seems to be the perfect case for me. I have a Gomadic cable to connect my Axim to my mobile phone for Internet access, so snap closures are not good because I can't close the case securely with the cable plugged in.

The Vaja seems to fit the form factor of the Axim the best. Plus it has the most professional look of all the flip top leather cases IMO. It also gives access to everything including the headphones. All in all, it seems perfect in every way...except price.

The pre-made units seem to be all sold-out right now. There's no way I'd pay the price for their custom-built ones. But $59.90 for the perfect case might be okay afterall. Anyone know if more of the standard (cheaper) units are going to be made?

[PotPie]

Just had to post that I just received my Vaja 964s ----- Flip Top Leather Case for Dell Axim X5 with Magnetic Closure & without clip. This is what I call the "pre-made" one. Let me just say, It is absolutely wonderful. The quality is the best that I have seen in leather cases. The fit is perfect. All buttons (reset, voice recorder, side jog dial, sd slot, headphone jack) have perfect cutouts in place. The leather is very, very nice. The magnets are very strong and hold the flip cover in place perfectly. I know that Vaja cases are somewhat expensive, but I think they are definitely worth every penny. This is my very first experience with a Vaja case and I could not be more pleased.

Like I said , just had to tell you so if anyone was on the fence in regards to buying the Vaja or not, go ahead and pony up and do it. I don't think you will regret it.

PotPie

[Andy Whiteford]

Got to admit, I do like the Vaja case as well. The magnetic closure is just so practical and the fit is excellent. I also like their new styling but I was a fan of the older, more moulded covers. Not sure why they have stopped making them unless it's just the Axim version that doesn't have this moulded cover.

[PetiteFlower]

Nope, sorry, can't do it. Even if it were made of gold, I couldn't pay more then 25% the cost of the PPC itself just for a case. Unless maybe it came with some winning lottery numbers tucked inside, or a personal masseuse, or something like that.....short of that, there's no way I could spend that much on a case.

[etalianstallion]

Looks like Belkin is making more cases available for the Dell Axim. Before they only had the top-flip case, but now they have 2 side-flip versions: one that is a zippered case and one that is not.

Non-Zippered Case for Dell Axim (http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=200589&pcount=&Product_Id=145499)

Zippered Case for Dell Axim (http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=200589&pcount=&Product_Id=145510)

[Simone]

Okay...the Belkin zippered case is almost exactly what I'm looking for...BUT I need to have it hold the Dell folding keyboard, too. Anyone seen anything like that?

Simi

[etalianstallion]

You may want to check out this new site, AximCases.com (http://www.aximcases.com).