bootldr changes on 3800?

[netdude0]

Does anyone have a link to the bootldr commands as shipped on the 3800's? I used to copy 3650 ROM images to CF and it appears as if the commands have changes and worse yet, i can not identify a HELP command.

Clues?

[MikPAQ]

hmmm?

[Registered]

Can you identify your bootldr version ?

[netdude0]

To close the thread and provide a Tid-Bit..

r2c was replaced with r2c32 on the 3800 bootldr.

[Igor]

What command wil be to copy ROM to PC`s HDD? I don`t have CF card and I know I did it somehow with my old 3630 but I can`t remeber how?!?!

[graffic]

38xx New boot loader interface.
- Goto bootloader interface: itask+power+reset
- Command help: hhhhh
- Command list:
FW 0:16:18>hhhhh
Available monitor commands are:
????? [command]
hhhhh [command]
r [[register] [[=] [hex_value]]]
g StartAddr
mb [StartAddr [Count [Filler]]]
mh [StartAddr [Count [Filler]]]
mw [StartAddr [Count [Filler]]]
mv SourceAddr DestAddr Length
ew Addr
eh Addr
eb Addr
u [StartAddr [Count]]
ud [StartAddr [Count]]
l [path_name]
lcp filename.bin
lb [path_name]
ppdl
ppcp
s StartAddr Count Pattern...
ram start len
map
page
lr bin-file
lnb nb-file
lnbCF nb-file
cp reg# OPC_2 CRm [value]
romcopy [RamAddr, RomAddr, Length]
writest [block]
wbuftest [block]
eratest [block]
stress count(Hex)
r2c16 [command]
r2ca16
c2r
r2c32
r2ca32
btinit
btroute
erase start len
lcdtest [loop delay(ms)]
romchip [number of chip]
usb
uart
bup
adc