Quote:
|
Originally Posted by Kris Kumar
I have a stand alone GPS, the trouble is the power cables. Too much clutter. If the GPS unit is part of the Car Mount, then there is only one cable. I know it does not sound like much, but 50% reduction in the number of cables is a lot on my dash. ;-)
|
I use a slightly older version of the Arkon Mount pictured here.
http://www.arkon.com/bluetoothgps.html
There is one power cable that goes to the car power outlet. They supply a short cable that goes from a USB socket at the bottom of the mount, to your PPC charge connector. You can see that on the pictures. For trips shorter than my BT rechargeable battery life, <6 hours, I just stick the BT GPS on the dash. Essentially one cable. If the trip is longer, they supply a short cable that plugs into to side of the mount to power the GPS. Really the clutter is minimal. I actually mounted the Arkon using the ProClip mounting system for my Jeep. That puts a shelf right behing the Arkon mount that is a perfect place for the GPS. So I have one cable that powers the mount, a short cable to the PPC and a short cable to the GPS, if needed. And I get to take my GPS along when I travel, and rent a car, which is where i need the GPS most anyway.