[Shadowcat]

I had to go to work this morning and didn't have time to look through the info more thoroughly. The pictures clearly depict a CF slot too.

Originally Posted by ··metaCOREtex··

there is not enough info @ this point .. brighthand.com has a lil article on the h2200 also: http://brighthand.com/article/HP_iPA...s_FCC_Approval

and looking @ this pic, the GreatWallB runs on a PXA255 400 Mhz with the A0 core stepping with 64MB ROM & 64MB RAM

If you look at that picture, it appears that the speaker is on the back of the machine. In addition, there are a couple of holes in the upper portion of the back of the machine. I wonder what those are for. My suspicion is that HP might introduce a new expansion system, it may be for an extra battery, or it might be for a flip cover of some sort. Or at least I hope!

[Shadowcat]

I had to go to work this morning and didn't have time to look through the info more thoroughly. The pictures clearly depict a CF slot too.

Originally Posted by ··metaCOREtex··

there is not enough info @ this point .. brighthand.com has a lil article on the h2200 also: http://brighthand.com/article/HP_iPA...s_FCC_Approval

and looking @ this pic, the GreatWallB runs on a PXA255 400 Mhz with the A0 core stepping with 64MB ROM & 64MB RAM

If you look at that picture, it appears that the speaker is on the back of the machine. In addition, there are a couple of holes in the upper portion of the back of the machine. I wonder what those are for. My suspicion is that HP might introduce a new expansion system, it may be for an extra battery, or it might be for a flip cover of some sort. Or at least I hope!

[Jacob]

I do hope the speaker isn't in the back, that might be annoying since the most comfortable way to hold it could be to put your hand over it and therefore block the sound!

[spursdude]

Hmm... does anybody else think that it resembles the Axim a lot?

Otherwise seems like a really nice device. And Jacob, I'm with you... is that the speaker on the back?

[bdegroodt]

Speaking of Axim, I'd think that Dell would dispatch the upgraded Axim's about the same time this one is ready to hit the market. Should be a Dell vs Ipaq release cycle again.

[Jacob]

It doesn't look as big as the Axim, but it seems to have taken the idea of the rubber sides from it.

Not as big as the Axim which is always good!

Don't think I'm gonna go for this one though...

[rmcadams]

Does anyone know if PPC 2003 will support USB 2.0? If so, any idea if the HP 2200 will?

[Andy Whiteford]

I think USB 1.1 would be a good start although that is an ActiveSync issue so no reason for current hardware to support USB 2.0.
Would be good for future devices though.

[StrikeTen]

This Kicks @$$!!! IS there ANY word on ANY kind of price. As long as it is <$500 I AM GAME!!! :jawdrop: :snipersmile:

[delfuhd]

Yes, it's rumored to be under $400.

[Looxer]

Originally Posted by Andy Whiteford

I think USB 1.1 would be a good start although that is an ActiveSync issue so no reason for current hardware to support USB 2.0.
Would be good for future devices though.

I am connecting the cradle of my iPAQ h5450 to USB 2, it works! :|