Pocket PC Thoughts - Daily News, Views, Rants and Raves

Check out the hottest Windows Mobile devices at our Expansys store!





Go Back   Thoughts Media Forums > POCKET PC THOUGHTS > HARDWARE DISCUSSION (open to all) > HP iPAQ Pocket PCs

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-21-2003, 07:26 AM
Sage
WyattEarp's Avatar
Join Date: Aug 2006
Posts: 653
Default NEW iPAQ H5555 Update

This update Firmware version 100.18 fixes a number of problems and also restores the ClearType Tuner the was removed by the last update Firmware version 100.17.

Fingerprint Software Version 3.7:
* Corrects where it allowed to select alphanumeric characters using the softkey with the "simple 4 digit PIN" option for Password.
* Corrects the 12 and 24 hours option where it could not be selected in the "Prompt if device unused for" field under Password.

Bluetooth Driver Version 1.4.1.58:
* Corrects problem where system would hang when disconnecting a PAN connection via the Incoming Connection icon.
* Corrects a problem where the device needed a Normal Reset after being turned off while transferring data via SPP, for example, while connected to a Bluetooth GPS device.
* Corrects the proxy settings getting erased in the Bluetooth Settings.
* Corrects a problem when using 'Dial via Bluetooth' which would not accept spaces in the phone number.

Corrects an issue where the iPAQ unit does not waking up to perform a scheduled iPAQ Backup.

Restore ClearType Tuner that was removed by the previous XIP update (English and German only).

Note: This update does not change the bios version number
__________________
Making use of mobile tech like no other.
 
Reply With Quote
  #2 (permalink)  
Old 11-21-2003, 05:41 PM
Pupil
Join Date: Jul 2003
Posts: 24

I just applied this update.

For some reason it did not complete successfully.

My iPaq is now dead. Will not boot past the start-up logo.

Tried hard boot, tried removing battery.
__________________
Jim R Vaughan
 
Reply With Quote
  #3 (permalink)  
Old 11-22-2003, 07:42 AM
Sage
WyattEarp's Avatar
Join Date: Aug 2006
Posts: 653

Quote:
Originally Posted by jimvaughan
I just applied this update.

For some reason it did not complete successfully.

My iPaq is now dead. Will not boot past the start-up logo.

Tried hard boot, tried removing battery.
At what point did it stop?
__________________
Making use of mobile tech like no other.
 
Reply With Quote
  #4 (permalink)  
Old 11-22-2003, 07:16 PM
Pupil
Join Date: Jul 2003
Posts: 24

Not sure I wasn't paying that much attention to the update.

However it wouldn't boot.

Just got a new one from Best Buy.
__________________
Jim R Vaughan
 
Reply With Quote
  #5 (permalink)  
Old 11-24-2003, 03:35 AM
Sage
WyattEarp's Avatar
Join Date: Aug 2006
Posts: 653

Cool, :way to go: Hope it was an exchange... Anyway, that solves that problem; doesn't it. Keep an eye on the upgrade the next time...
__________________
Making use of mobile tech like no other.
 
Reply With Quote
  #6 (permalink)  
Old 11-25-2003, 12:20 AM
Pupil
Join Date: Jul 2003
Posts: 24

Yes it was an exchange, next time (as you say) I'll pay attention.
__________________
Jim R Vaughan
 
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 09:12 AM.



Search Engine Friendly URLs by vBSEO 3.2.0 RC7