Pocket PC Thoughts - Daily News, Views, Rants and Raves

Check out the hottest Windows Mobile devices at our Expansys store!





Go Back   Thoughts Media Forums > POCKET PC THOUGHTS > HARDWARE DISCUSSION (open to all) > HP iPAQ Pocket PCs

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 10-21-2006, 10:08 PM
Pupil
Join Date: Mar 2006
Posts: 16
Default iPAQ troubles

Hi all, I've got a PDA problem that someone may be able to help me with. I've got an HP Rx3115 iPAQ. about a week ago I neglected to charge it up. When I turned it on it displayed this the screen you get when you do a soft reset. It went about 60% across then shut down. It did the same thing about three times, I plugeed the charging cable in tried it again. Same results, I did a soft reset and it went almost 75% across but still shut down. I did what on my other iPAQ would be a hard reset but I got the same results. Anybody have a suggestion?
Ricky
 
Reply With Quote
  #2 (permalink)  
Old 10-22-2006, 01:57 AM
Thinker
JesterMania's Avatar
Join Date: Aug 2006
Posts: 381

You say you neglected to charge your PDA for a week, so the battery probably contains very little charge for your device to be operable anymore. Then you said you plugged in your charging cable and it still didn't help. But did you plug in the charging cable and let it charge for at least 20 minutes or so before trying again? It could be that your battery is fully discharged, and the power going through the charger is not providing sufficient energy for your device to boot up. Give it some time to charge up the battery a little and get back to us on how things go.
 
Reply With Quote
  #3 (permalink)  
Old 10-22-2006, 04:23 AM
Pupil
Join Date: Mar 2006
Posts: 16
Default iPAQ

It was just two days, I've plugged it into the charger cable and I'm not even getting the yellow flashing light. Will give it some time and try it again. Thanks Ricky
 
Reply With Quote
  #4 (permalink)  
Old 10-22-2006, 06:22 PM
Pupil
Join Date: Mar 2006
Posts: 16

OK I think I'm getting somewhere. I have had it on the charging cable since yesterday eve. I puashed the power switch and a Screen showed HP and some numbers a the bottom. there was a progress line going across. This time it made it all the way! A blue screen popped up that said "Touch screen to begin using ...." the flashing charge light came on then it all went blank again. I'm going to leave it on charge.
 
Reply With Quote
  #5 (permalink)  
Old 10-22-2006, 09:55 PM
Thinker
JesterMania's Avatar
Join Date: Aug 2006
Posts: 381

I'd recommend you get it checked by HP. It looks to me like you have a dying battery but it could be something more serious. Since your device is a pre-WM5, a dying battery would cause more destruction (in terms of loss of data) than on a device with WM5 installed. I recently got my device fixed with HP and it was QUICK. I got my device shipped to HP in 1 day, it took them another day to repair it, and on the 3rd day the device arrived at my house - all without me paying a single cent (I'm still under a 1-year warranty). In fact, I didn't even have to step out of my house as the service was done through Purolator (a shipping service).
 
Reply With Quote
  #6 (permalink)  
Old 10-23-2006, 06:44 AM
Pupil
Join Date: Mar 2006
Posts: 16

Well mine is not under warranty. as of now about every 10-15 min. It lights up the charge light flashes a few times, the blue screen that says "click here to begin using your......" then it goes dead again. I'm going to take the battery to see if someone can test it out!
 
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 10:35 AM.



Search Engine Friendly URLs by vBSEO 3.2.0 RC7