WinCe Kernal Initialization
Hi All ,
We are trying to Port WinCe Kernal To ARM 926EJS Board
We were able to run BootLoader From The Flash and we successfully recieved the Debug Messages At
Hyperterminal Console
And also we were able To Download nk.bin To The Board Through Ethernet Cable to the Board.
After That we got the following messages on the Hyperterminal Console
Using device name: ARMVPB6499
Device ARMVPB6499, IP 192.168.177.225, Port 981
Calling EdbgInitDHCP
-InitEther
-OEMKitlInit
!Kitl buffer specified by OAL is not required, ignore...
!Smsc111SendFrame: Timed out waiting for SMSC91C111 to allocate transmit memory.
SMSC111Init: ResetMMU
!OEMEthSendFrame failure, retry 1
!Smsc111Interrupt: Receive Overrun 0x1E.
SMSC111Init: ResetMMU
Host connected
Host IP: 192.168.178.85, port 2503
KITLGlobalState == 0x61
KITL Initialized
After getting this messages we didnot get any messages on Hyperterminal Console
We also tried to Ping to The Device but That too failed .
We also tried Remote Process Viewer but it failed Its not able to detect and Connect to Device .
Can you Please suggest us any solutions ?
|
Linear Mode
