[Chris Gohlke]

I recently reviewed the TSAT-2000s from The Speaker Company.  I really liked them and one of the few negatives I came up with was that they did not offer a subwoofer as part of their package even though it was really required to fully enjoy the speakers.  Shortly after my review, they added 2 subwoofers to their lineup and I recently purchased a full set of the speakers I reviewed along with the ASW-10 subwoofer, so thought I would relay my thoughts on the subwoofer.

After the break, get my take on this addition to the package.  

The subwoofer is built from high-density MDF and has a black ash veneer finish.  As you may recall, the TSAT-2000's had a piano black glossy finish, so while they don't match, I prefer this flatter finish since it will be sitting on the floor and be more of a dust and smudge magnet.  The unit is 14 3/8 inches square by 15 1/2 inches tall and sits on four large rubberized feet.

Figure 1: Front of Unit

The rear of the unit features a detachable power cord, a set of Line In and Hi Level In jacks, power switch, phase adjustment switch, and knobs for volume and frequency.

Figure 2: Rear of Unit

The construction of the unit is rock solid and all the switches and knobs have a high quality feel.  Like I said in my original review, I'm not an audiophile, so the technical specifications don't mean a whole lot to me.  But for those who are interested, this sub features a 10 inch High Excursion Driver with a 30 ounce ferrite magnet.  The cabinet is 5/8 inch thick MDF.  The unit uses a BASH® amplifier, has a 28-120 Hz frequency response, and 100 watts RMS (400 watts peak) of power.  All I really cared about was how it sounded.  Here I was not disappointed.  Basically it provided all the boom I wanted and none of the boom I didn't want.  I cranked the bass far past anything I would ever use and got nothing but rock solid boom.  When adjusted to more reasonable levels, it provided an excellent complement to the TSAT-2000's.

I'm very pleased with the ASW-10.  It combined perfectly with the TSAT-2000's and allowed me to drastically reduce the footprint of speakers in my living room without sacrificing quality sound.  You can pick up the ASW-10 directly from The Speaker Company for $149.97, including free shipping and free return shipping if you are not satisfied.

Chris Gohlke is a Contributing Editor for Digital Home Thoughts. He loves poker, RPGs, and Sci-Fi and loves to get his hands on real-life tech gadgets. He lives in Tallahassee, Florida, USA with his wife and three cats.

Do you enjoy using new hardware, software and accessories, then sharing your experience with others? Then join us on the Thoughts Media Review Team! We're looking for individuals who find it fun to test new gear and give their honest opinions about the experience. It's a volunteer role with some great perks. Interested? Then click here for more information.

[Chris Gohlke]

I recently reviewed the TSAT-2000s from The Speaker Company.  I really liked them and one of the few negatives I came up with was that they did not offer a subwoofer as part of their package even though it was really required to fully enjoy the speakers.  Shortly after my review, they added 2 subwoofers to their lineup and I recently purchased a full set of the speakers I reviewed along with the ASW-10 subwoofer, so thought I would relay my thoughts on the subwoofer.

After the break, get my take on this addition to the package.  

The subwoofer is built from high-density MDF and has a black ash veneer finish.  As you may recall, the TSAT-2000's had a piano black glossy finish, so while they don't match, I prefer this flatter finish since it will be sitting on the floor and be more of a dust and smudge magnet.  The unit is 14 3/8 inches square by 15 1/2 inches tall and sits on four large rubberized feet.

Figure 1: Front of Unit

The rear of the unit features a detachable power cord, a set of Line In and Hi Level In jacks, power switch, phase adjustment switch, and knobs for volume and frequency.

Figure 2: Rear of Unit

The construction of the unit is rock solid and all the switches and knobs have a high quality feel.  Like I said in my original review, I'm not an audiophile, so the technical specifications don't mean a whole lot to me.  But for those who are interested, this sub features a 10 inch High Excursion Driver with a 30 ounce ferrite magnet.  The cabinet is 5/8 inch thick MDF.  The unit uses a BASH® amplifier, has a 28-120 Hz frequency response, and 100 watts RMS (400 watts peak) of power.  All I really cared about was how it sounded.  Here I was not disappointed.  Basically it provided all the boom I wanted and none of the boom I didn't want.  I cranked the bass far past anything I would ever use and got nothing but rock solid boom.  When adjusted to more reasonable levels, it provided an excellent complement to the TSAT-2000's.

I'm very pleased with the ASW-10.  It combined perfectly with the TSAT-2000's and allowed me to drastically reduce the footprint of speakers in my living room without sacrificing quality sound.  You can pick up the ASW-10 directly from The Speaker Company for $149.97, including free shipping and free return shipping if you are not satisfied.

Chris Gohlke is a Contributing Editor for Digital Home Thoughts. He loves poker, RPGs, and Sci-Fi and loves to get his hands on real-life tech gadgets. He lives in Tallahassee, Florida, USA with his wife and three cats.

Do you enjoy using new hardware, software and accessories, then sharing your experience with others? Then join us on the Thoughts Media Review Team! We're looking for individuals who find it fun to test new gear and give their honest opinions about the experience. It's a volunteer role with some great perks. Interested? Then click here for more information.

[Jason Dunn]

Looks like a good product, especially for the price!