Menneisyys
06-10-2008, 06:51 PM
A major breakthrough in C64 emulation: the long-awaited version 3.0 of Pocket Commodore 64 Plus Vic 20 has just been released!
If you’ve read the Commodore 64 Emulation Bible (http://www.pocketpcmag.com/cms/blogs/3/emulating_the_commodore_64_under_windows) (make sure you read it; in this article, I will NOT elaborate on how you can import / run games under the emulator), you already know that Pocket Commodore 64 has, apart from the CPU usage problem, always been the best C64 emulator for the platform.
The new version, along with a plethora of new features,
- also fixes the CPU usage problem (on the 624 MHz Del Axim x51v, while just idling, while the previous version uses all the CPU cycles, the new one about 35%... 45% (measured on the x51v and the iPAQ 210, respectively; both running at 624 MHz).
- has built-in support for the Commodore VIC 20
- it supports edge softening on VGA devices (accessible via Settings / Soften video). This has excellent results. For example, compare the following two screenshots:
http://www.winmobiletech.com/062008C64emu3/SmoothedVGA1.png
(non-smoothed)
http://www.winmobiletech.com/062008C64emu3/SmoothedVGA2.png
(smoothed)
The smoothed version is indeed much easier on the eyes – as is the case with, say, ScummVM running on high-res devices (not only on Windows Mobile but also, say, high-res Symbian devices like the E90).
Multiplayer - a full tutorial
Another major new feature is supporting a non-multicast IP-based LAN / Internet multiplayer games (read THIS (http://www.pocketpcmag.com/blogs/menneisyys/102005MPPPCGames.asp) if you don't know what they are and how they should be used). This works the following way (unfortunately, it’s pretty vaguely explained in the original docs so I found it better to explain it more verbosely).
1. Connect the two Pocket PC’s to the Net; make sure at least one has a direct IP visible. This is always the case in p2p networks like an ad-hoc Wi-Fi connection between the two Pocket PC’s or two PPC’s connecting to the same access point. However, as the IP model is VERY flexible (much more flexible than, say, doing the same with an app with native Microsoft BT support only), you can play a multiplayer game over any kind of connection – even with a remote friend.
2. Start the standard (PComm64) emulator on the server, on the client PCRemote64
3. On the server, go to Settings / Setup Controls (the third button from the top on the bottom left):
http://www.winmobiletech.com/062008C64emu3/SetupNetwork1.png
Click Network Game in the upper right corner of the interface (well above the huge Close button).
Now, PC64 will report the server running and will also display the IP you’ll need to enter to the client:
http://www.winmobiletech.com/062008C64emu3/SetupNetwork3.png
4. On the client, enter the server address (the input field takes the same area as the three virtual drive icons normally); here, 169.254.155.017 (note that it’s different from the previous screenshot)
http://www.winmobiletech.com/062008C64emu3/SetupNetwork4.png
and click Connect under the IP input field:
http://www.winmobiletech.com/062008C64emu3/SetupNetwork6.png
Note that all the file loading icons are disabled. This is because it’s always the server that must initiate file loading; the client doesn’t need to do anything.
I’ve played Wizard of Wor (http://en.wikipedia.org/wiki/Wizard_of_Wor) in this setup (over a Wi-Fi p2p LAN connection). Worked flawlessly (apart from being a little bit slow), particularly after increasing the, by default, 1 frameskip a bit. With Archon, however, firing didn’t work at all on either the server or the client, rendering the battle useless and, consequently, the game unplayable. I haven’t tested other, multiplayer games.
Emulation core compliance tests
The new version also boasts of a brand new emulator core. I’ve thoroughly tested it with my standard tools (games & demos) to see whether it’s true and how much it has been improved.
The emulation indeed seems to be better, meaning more games being compatible with the emulator. For example, while nothing happened after the cracking note with the old version, with the new, it got as far as the other, desktop-based emulators - with the Guild of thieves (Blast! 336 / *).
The demo tests have shown HUGELY improved compatibility:
- while it’s still incompatible with Altered States 50% by Taboo (compatible with VICE 1.21 on the desktop), it at least displays the first textual message screen (“His drive”…))
- Bumpmania by Arise resulted in exactly the same results than the other emulators (the first part ran OK; after that, it just showed a white screen)
- Biba 2 - Dream Injection by Arise – it sees a distorted, useless directory; can’t load anything
- Dutch Breeze by Blackmail runs pretty well
- Cycle by Booze Design: runs – with graphical glitches because of the FLI mode. At least the initial soundtrack selection screen is presented OK
- Follow the Sign 3 - Unsound Minds by Byterapers runs OK until after the logo:
http://www.winmobiletech.com/062008C64emu3/FollowtheSign3.png
Then, in the default Fast CPU emulation mode, it exists with an invalid opcode message and asking (http://www.winmobiletech.com/062008C64emu3/FollowtheSign3-accu.png) for enabling the accurate mode. Unfortunately, running it in the accurate mode doesn’t help either: it immediately hangs after the logo above.
- One-Der by Oxyron is played back OK in both(!) modes.
- Tower Power 100% by Camelot: works great (including the animated countdown) until the title in Fast CPU mode; then exits. Accurate mode doesn’t help either: it crashes.
All in all, the emulator core has indeed been made MUCH, incomparably better.
Cons
As far as the cons are concerned, unfortunately, the game still doesn’t seem to be compatible with MS Smartphones. That is, you’ll need to stick to the recently-updated and, now, by default QVGA and Landscape-compatible PocketHobbit (http://pockethobbit.qsh.eu/). It has other bugfixes too and is (still) free.
Note that it does ask on touchscreen-enabled Pocket PC’s whether it has a touch screen (http://www.winmobiletech.com/062008C64emu3/DoesItHaveTouchscreen.png). The "do you have a touchscreen device?" shows it MAY support non-touchscreen devices. However, on none of my Smartphones (HTC s310 WM5, HTC s710 WM6) did it work. While installing WMCab.cab worked, as opposed to PCommodore64Vic20Setup.exe - when installing the latter on the platform, the installer transferred a CAB file fully incompatible with the Smartphone –, the emulator itself refused to run complaining about a missing component. (Screenshots of the two Smartphones I’ve tested it on HERE (http://www.winmobiletech.com/062008C64emu3/pc64Vox.png) and HERE (http://www.winmobiletech.com/062008C64emu3/PC64-SPOx.png)).
I’m still waiting for the answer to some of my questions from the developers (for example, on possible rebates for 2.xx owners); as soon as I have some relevant info, I post an update.
Verdict
This is indeed a major breakthrough. The multiplayer, the lack of the CPU usage bug of the old versions and the really cool, new, MUCH more compatible emulator core makes this title a REAL must if you’re into Commodore 64 (and/or VC-20) emulation. While it’s a bit pricy, now, with all these enhancements and bugfixes, the emulator is certainly worth the money.
If you’ve read the Commodore 64 Emulation Bible (http://www.pocketpcmag.com/cms/blogs/3/emulating_the_commodore_64_under_windows) (make sure you read it; in this article, I will NOT elaborate on how you can import / run games under the emulator), you already know that Pocket Commodore 64 has, apart from the CPU usage problem, always been the best C64 emulator for the platform.
The new version, along with a plethora of new features,
- also fixes the CPU usage problem (on the 624 MHz Del Axim x51v, while just idling, while the previous version uses all the CPU cycles, the new one about 35%... 45% (measured on the x51v and the iPAQ 210, respectively; both running at 624 MHz).
- has built-in support for the Commodore VIC 20
- it supports edge softening on VGA devices (accessible via Settings / Soften video). This has excellent results. For example, compare the following two screenshots:
http://www.winmobiletech.com/062008C64emu3/SmoothedVGA1.png
(non-smoothed)
http://www.winmobiletech.com/062008C64emu3/SmoothedVGA2.png
(smoothed)
The smoothed version is indeed much easier on the eyes – as is the case with, say, ScummVM running on high-res devices (not only on Windows Mobile but also, say, high-res Symbian devices like the E90).
Multiplayer - a full tutorial
Another major new feature is supporting a non-multicast IP-based LAN / Internet multiplayer games (read THIS (http://www.pocketpcmag.com/blogs/menneisyys/102005MPPPCGames.asp) if you don't know what they are and how they should be used). This works the following way (unfortunately, it’s pretty vaguely explained in the original docs so I found it better to explain it more verbosely).
1. Connect the two Pocket PC’s to the Net; make sure at least one has a direct IP visible. This is always the case in p2p networks like an ad-hoc Wi-Fi connection between the two Pocket PC’s or two PPC’s connecting to the same access point. However, as the IP model is VERY flexible (much more flexible than, say, doing the same with an app with native Microsoft BT support only), you can play a multiplayer game over any kind of connection – even with a remote friend.
2. Start the standard (PComm64) emulator on the server, on the client PCRemote64
3. On the server, go to Settings / Setup Controls (the third button from the top on the bottom left):
http://www.winmobiletech.com/062008C64emu3/SetupNetwork1.png
Click Network Game in the upper right corner of the interface (well above the huge Close button).
Now, PC64 will report the server running and will also display the IP you’ll need to enter to the client:
http://www.winmobiletech.com/062008C64emu3/SetupNetwork3.png
4. On the client, enter the server address (the input field takes the same area as the three virtual drive icons normally); here, 169.254.155.017 (note that it’s different from the previous screenshot)
http://www.winmobiletech.com/062008C64emu3/SetupNetwork4.png
and click Connect under the IP input field:
http://www.winmobiletech.com/062008C64emu3/SetupNetwork6.png
Note that all the file loading icons are disabled. This is because it’s always the server that must initiate file loading; the client doesn’t need to do anything.
I’ve played Wizard of Wor (http://en.wikipedia.org/wiki/Wizard_of_Wor) in this setup (over a Wi-Fi p2p LAN connection). Worked flawlessly (apart from being a little bit slow), particularly after increasing the, by default, 1 frameskip a bit. With Archon, however, firing didn’t work at all on either the server or the client, rendering the battle useless and, consequently, the game unplayable. I haven’t tested other, multiplayer games.
Emulation core compliance tests
The new version also boasts of a brand new emulator core. I’ve thoroughly tested it with my standard tools (games & demos) to see whether it’s true and how much it has been improved.
The emulation indeed seems to be better, meaning more games being compatible with the emulator. For example, while nothing happened after the cracking note with the old version, with the new, it got as far as the other, desktop-based emulators - with the Guild of thieves (Blast! 336 / *).
The demo tests have shown HUGELY improved compatibility:
- while it’s still incompatible with Altered States 50% by Taboo (compatible with VICE 1.21 on the desktop), it at least displays the first textual message screen (“His drive”…))
- Bumpmania by Arise resulted in exactly the same results than the other emulators (the first part ran OK; after that, it just showed a white screen)
- Biba 2 - Dream Injection by Arise – it sees a distorted, useless directory; can’t load anything
- Dutch Breeze by Blackmail runs pretty well
- Cycle by Booze Design: runs – with graphical glitches because of the FLI mode. At least the initial soundtrack selection screen is presented OK
- Follow the Sign 3 - Unsound Minds by Byterapers runs OK until after the logo:
http://www.winmobiletech.com/062008C64emu3/FollowtheSign3.png
Then, in the default Fast CPU emulation mode, it exists with an invalid opcode message and asking (http://www.winmobiletech.com/062008C64emu3/FollowtheSign3-accu.png) for enabling the accurate mode. Unfortunately, running it in the accurate mode doesn’t help either: it immediately hangs after the logo above.
- One-Der by Oxyron is played back OK in both(!) modes.
- Tower Power 100% by Camelot: works great (including the animated countdown) until the title in Fast CPU mode; then exits. Accurate mode doesn’t help either: it crashes.
All in all, the emulator core has indeed been made MUCH, incomparably better.
Cons
As far as the cons are concerned, unfortunately, the game still doesn’t seem to be compatible with MS Smartphones. That is, you’ll need to stick to the recently-updated and, now, by default QVGA and Landscape-compatible PocketHobbit (http://pockethobbit.qsh.eu/). It has other bugfixes too and is (still) free.
Note that it does ask on touchscreen-enabled Pocket PC’s whether it has a touch screen (http://www.winmobiletech.com/062008C64emu3/DoesItHaveTouchscreen.png). The "do you have a touchscreen device?" shows it MAY support non-touchscreen devices. However, on none of my Smartphones (HTC s310 WM5, HTC s710 WM6) did it work. While installing WMCab.cab worked, as opposed to PCommodore64Vic20Setup.exe - when installing the latter on the platform, the installer transferred a CAB file fully incompatible with the Smartphone –, the emulator itself refused to run complaining about a missing component. (Screenshots of the two Smartphones I’ve tested it on HERE (http://www.winmobiletech.com/062008C64emu3/pc64Vox.png) and HERE (http://www.winmobiletech.com/062008C64emu3/PC64-SPOx.png)).
I’m still waiting for the answer to some of my questions from the developers (for example, on possible rebates for 2.xx owners); as soon as I have some relevant info, I post an update.
Verdict
This is indeed a major breakthrough. The multiplayer, the lack of the CPU usage bug of the old versions and the really cool, new, MUCH more compatible emulator core makes this title a REAL must if you’re into Commodore 64 (and/or VC-20) emulation. While it’s a bit pricy, now, with all these enhancements and bugfixes, the emulator is certainly worth the money.