beemer
07-13-2006, 03:33 PM
I'm trying to finish 0.6 Version of TodayWarrior, For those that doesn't know what this program is I'll copy the former description bellow.
But What I need of PDA Users is to test V0.59, almost the next version and report all the failures and whishes.
The new features are:
-Detection of infraestructure/adhoc mode when scanning
-Associated AP is shown when not in scanning mode.
-Greater compatibility with Axims, HTC, Qtek and other brand in WIFI ON/OFF control
-Support for 802.g and n (previously only for b)
-Bluetooth On/off control for Microsoft and Widcomm Stacks
-Time from last charge in hours. Previously we have only Time ON from last chrge. Now we have both.
-Charge and discharge current are now shown on certain PDAs
-CPU Usage graph for the last minute.
-Soft reset button is now full WM5 compatible. It writes down the registry and databases to ROM before execute the reset.
-Brighness control now can be modified taping directly to the desired level.
-Holding Brighness control now let you directly to the control panel brightness aplet.
POWER MANAGEMENT : This line can be selected from Options panel
Access to the Power panel of control panel
Current power percentage of the battery
Current elapsed time from the last full charge of the battery. It can also show that we are charging or operating with external power.
Holding this field we can select to reset Elapsed time. Useful on battery change.
Remaining Time with the current consumption rate: An estimate of how long the PocketPC will last at the current discharge rate. It can indicate also, the remaining time to reach 100 % of charge or that the battery is fully charged.
Tapping cyclically Remaining time field the display change to Battery Volts, current (mA), power consumption (mW) and battery Temperature in ºC and ºF. This data is only available in some PPCs :
Power off button.
Reset Button: Will display a message for confirmation.
Icon Always ON: Touching this icon changes it to a green color. In this state the PPC will not turn off although we have it set in the energy options. Useful when scanning networks or downloading files. It is deactivated manually or automatically on having charged the battery or if the remaining battery level is lower than 25 %.
Icon Memory: It starts memory control panel.
Icon Today: It starts today element control panel.
Backlight slider: it allows us to change the screen brightness when we are using the PPC with batteries. Turning the backlight off is prevented. The maximum value is user-selectable from options panel
In the options panel there is an option to Turn Off the PDA when the battery lever goes down to 4% in order to protect the battery from running down.
IMPORTANT: TodayWarrior is, and will remain forever as freeware.
You can find it here:
http://personales.ya.com/beemer/down...arriorV059.CAB
For the people that doesn't know this program, these are the other relevant functions:
WIFI MANAGEMENT : This line can be selected from Options panel
Icon of WIFI Card ON/OFF: Grayed: without card or not recognized by TodayWarrior. Blue:ON For NDIS cards..
Optionally can be deactivated for PocketPCs with their own mechanism to do so. If deactivated on Dell X50 (not X51), the icon calls the internal On/Off utility.
Shows current connection speed of WIFI card when connected or testing.
Information about available networks: In scan mode shows SSID, Rx level with a color bar and digits, radio channel used and if WEP security is enabled (W) or is Open (O). If several networks were received, two arrows appear in order to change the network displayed (rotational). Normally the most powerful network is selected.
In stand-by mode, if the NIC is associated to an AP, shows the information.
Extended information of the connected network and Internet access testing. It is necesary to have WifiKnife. installed.
Automatic association with available networks and internet access test. It is necesary to have WifiKnife. installed.
TodayWarrior plays a sound when a new network is found and maintains the lost networks for 30 seconds after they disappear.
AvantGo sync panel access icon.
Access Icon to WZC (Wireless zero configuration) to connect to the available networks. Holding this Icon we can activate/deactivate WZC. It will be necessary to do a soft reset. Red: WZC deactivated
Green: WZC activated.
But What I need of PDA Users is to test V0.59, almost the next version and report all the failures and whishes.
The new features are:
-Detection of infraestructure/adhoc mode when scanning
-Associated AP is shown when not in scanning mode.
-Greater compatibility with Axims, HTC, Qtek and other brand in WIFI ON/OFF control
-Support for 802.g and n (previously only for b)
-Bluetooth On/off control for Microsoft and Widcomm Stacks
-Time from last charge in hours. Previously we have only Time ON from last chrge. Now we have both.
-Charge and discharge current are now shown on certain PDAs
-CPU Usage graph for the last minute.
-Soft reset button is now full WM5 compatible. It writes down the registry and databases to ROM before execute the reset.
-Brighness control now can be modified taping directly to the desired level.
-Holding Brighness control now let you directly to the control panel brightness aplet.
POWER MANAGEMENT : This line can be selected from Options panel
Access to the Power panel of control panel
Current power percentage of the battery
Current elapsed time from the last full charge of the battery. It can also show that we are charging or operating with external power.
Holding this field we can select to reset Elapsed time. Useful on battery change.
Remaining Time with the current consumption rate: An estimate of how long the PocketPC will last at the current discharge rate. It can indicate also, the remaining time to reach 100 % of charge or that the battery is fully charged.
Tapping cyclically Remaining time field the display change to Battery Volts, current (mA), power consumption (mW) and battery Temperature in ºC and ºF. This data is only available in some PPCs :
Power off button.
Reset Button: Will display a message for confirmation.
Icon Always ON: Touching this icon changes it to a green color. In this state the PPC will not turn off although we have it set in the energy options. Useful when scanning networks or downloading files. It is deactivated manually or automatically on having charged the battery or if the remaining battery level is lower than 25 %.
Icon Memory: It starts memory control panel.
Icon Today: It starts today element control panel.
Backlight slider: it allows us to change the screen brightness when we are using the PPC with batteries. Turning the backlight off is prevented. The maximum value is user-selectable from options panel
In the options panel there is an option to Turn Off the PDA when the battery lever goes down to 4% in order to protect the battery from running down.
IMPORTANT: TodayWarrior is, and will remain forever as freeware.
You can find it here:
http://personales.ya.com/beemer/down...arriorV059.CAB
For the people that doesn't know this program, these are the other relevant functions:
WIFI MANAGEMENT : This line can be selected from Options panel
Icon of WIFI Card ON/OFF: Grayed: without card or not recognized by TodayWarrior. Blue:ON For NDIS cards..
Optionally can be deactivated for PocketPCs with their own mechanism to do so. If deactivated on Dell X50 (not X51), the icon calls the internal On/Off utility.
Shows current connection speed of WIFI card when connected or testing.
Information about available networks: In scan mode shows SSID, Rx level with a color bar and digits, radio channel used and if WEP security is enabled (W) or is Open (O). If several networks were received, two arrows appear in order to change the network displayed (rotational). Normally the most powerful network is selected.
In stand-by mode, if the NIC is associated to an AP, shows the information.
Extended information of the connected network and Internet access testing. It is necesary to have WifiKnife. installed.
Automatic association with available networks and internet access test. It is necesary to have WifiKnife. installed.
TodayWarrior plays a sound when a new network is found and maintains the lost networks for 30 seconds after they disappear.
AvantGo sync panel access icon.
Access Icon to WZC (Wireless zero configuration) to connect to the available networks. Holding this Icon we can activate/deactivate WZC. It will be necessary to do a soft reset. Red: WZC deactivated
Green: WZC activated.