HELP! Battery Door Falling Off

[Kacey Green]

My battery door is starting to come off of my iPAQ 2215 one of the plastic pins next to the latch has broken away from the battery door.

What do I do? If the other pin comes off also the device won't power on because when the door is ajar or off.

It's working fine for now because the remaining pin keeps enough pressure to make contact.

[Steven Cedrone]

Is it the battery door itself? If so, order the replacement grips from HP, they include a new battery door with the kit...

Steve

[jimH]

Call HP support and order a new door. They are free. You will also get new side grips as a bonus. You can do a forum search on this board as well as on Brighthand for extensive threads regarding side grips on the 221X. You need to ask the HP tech for the plastics kit for the 221x.

Good luck,
Jim

[Kacey Green]

thanks guys would you happen to have a link, if not I will search here and bright hand

[Steven Cedrone]

Please note that, if the side grips (Spare Part Number 349036-001) of your iPAQ Pocket PC h2200 unit are damaged due to a defective slip case, the side grips and slip case can be replaced by you. The replacement side grips and slip case can be ordered by you, please contact our Technical Support at 1-800-652-6672, options 3, 1 (enter 10 digit phone number), 2. If you are a first time caller, your phone number will not be registered in the database. You will need to enter your phone number twice and then wait for the routing center to put you through to a Technical Support Specialist.

This may be old information!

Steve

[jnajera]

Use thier 800 number they will fix you up in no time.