Quote:
|
Originally Posted by Menneisyys
Yes, 3.3M is far too low. Just make sure you install the app on the storage card and also copy the PWI's to be converted there. Then, it'll write to the storage card directly and you won't run out of storage space.
|
Menneisyys, it wasn't the disk space. The Mac program I'm using to try to get this information while connected via USB or Bluetooth just isn't accurate. I found a place on the Treo where I could check the file space, and there is 23MB free on the Treo and another 46MB free on the storage card.
It must be the RAM. Same error over and over again on the 4MB PWI files! I uninstalled the PWI_Embedded_Sound_Extractor_ARMV4 program from the Treo, then installed this file again and installed it to the Storage Card. I moved a file to the storage card and tried it, and the exact same error.
I did try making a 2-second PWI voice recording and converting it and it did work, so I know the install is correct. I also tried a 1.79MB file, and it was successful. It's just not handling the 4MB files! I tried closing all programs running on the Treo to free up as much RAM as possible, but it still gives that error.
I'm not sure if there is anything else I am going to be able to try to make this work?