|
You need to find out what com port your bluetooth adapter is using for its serial port. go into your hardware manager under control panel and system. once you have this information....
Open activesync and click file then connection settings. Tell activesync to use the following com port (the one for bluetooth serial) and then apply those settings. You may even want to uncheck usb and the allow network boxes until you get the bluetooth working then go back and enable those two once you have things up and running.
on your ppc open up your bluetooth manager and click on a new connection. scroll down and choose Activesync via bluetooth. follow the on screen instructions and they will tell you to do the same thing i just did.
Good luck... Hope this helps.
|